User's Manual and Documentation

Site Tools

You are here: start » t2 » usage_guides » systems » wii

Sidebar

User's Manual

t2:usage_guides:systems:wii

This is an old revision of the document!

Table of Contents

Wii U and Wii

The Nintendo Wii U (2012) and Nintendo Wii (2006) are supported by the Titan Two device. The Titan Two connects to the Wii U and Wii consoles emulating an original Wii U Pro controller.

Controller Protocol

Relevant information about the Nintendo Wii U Pro controller protocol.

Bluetooth Polling Interval 8ms
Device Authentication YES Extension Data Encryption

Specific Features

Titan Two support for Nintendo Wii U and Wii specific features.

Player LEDs YES
Rumble (Vibration) YES

Wireless Connection

Requirements

  1. Bluetooth Module 1);
  2. Micro-SD Card 2);
  3. Provided Micro-USB cable or External Power Supply 3).

First-time Configuration

  1. Install and configure the Bluetooth Module and the Micro-SD Card on the Titan Two;
  2. Power the Titan Two utilizing the provided Micro-USB cable or the External Power Supply;
  3. Configure the Output Protocol of the Titan Two to Bluetooth Wii U / Wii.

Pairing Method A:

  1. Press the Sync button on the Wii U / Wii Console;
  2. Press and hold the UP button on the Titan Two for 2.5 seconds to enter in pairing mode;
  3. The Titan Two will enter in Bluetooth pairing mode and after few seconds the OUTPUT LED should turn green, indicating the pairing with the Wii U / Wii succeed.

Pairing Method B:

  1. Connect the Titan Two PROG port to the computer using the provided Micro-USB cable;
  2. Open Gtuner IV, go to the Device Configuration pane and click the Wireless Bluetooth Pairing button;
  3. Press the Sync button on the Wii U / Wii Console;
  4. The Titan Two will enter in Bluetooth pairing mode and after few seconds the OUTPUT LED should turn green, indicating the pairing with the Wii U / Wii succeed.

Regular Usage

  1. Power the Titan Two utilizing the provided Micro-USB cable or the External Power Supply;
  2. Connect any compatible controller to the Titan Two;
  3. Press the PS/Xbox/Guide/Home button on the controller to initiate the wireless connection between the Titan Two and Wii U / Wii.
Troubleshooting: If the Bluetooth connection with Wii U / Wii does not work, try disconnect all controllers from the console:
System Settings → Wii Remote and Sensor Bar → Delete All Wii Remote Pairings.
1) , 2) The Bluetooth Module + Micro-SD Card Bundle is sold separately.
3) The External Power Supply is sold separately.
t2/usage_guides/systems/wii.1551824474.txt.gz · Last modified: 2019/03/05 17:21 by J2Kbr