User's Manual and Documentation

Site Tools

You are here: start » t2 » usage_guides » systems » xboxseries

Sidebar

User's Manual

t2:usage_guides:systems:xboxseries

Table of Contents

Xbox Series X|S

This page needs Review/Update

All Xbox Series consoles are supported. The Titan Two connects to the Xbox Series X|S emulating an original Xbox Series controller.

Console Polling Rate

Default and maximum USB polling rate supported by the console.

USB Default 250Hz (4ms)
USB Maximum 1000Hz (1ms)

Controller Protocol

Relevant information about the Xbox Series X|S controller protocol.

USB Polling Interval 8ms
Device Authentication YES enumeration

Specific Features

Titan Two support for Xbox Series X|S specific features.

Rumble (Vibration) YES
Impulse Triggers YES
Chatpad YES Xbox compatible controller required
Headset YES Xbox compatible controller required

Wired Connection

Requirements

  1. Provided Micro-USB cable.
  2. An official Xbox Series Controller

First-time Configuration

  1. Configure the Output Protocol of the Titan Two to USB Automatic or USB Xbox Series X|S.

Regular Usage

  1. Connect any official Xbox Series controller to INPUT-B on the Titan Two (for authentication);
  2. Connect the provided Micro-USB cable to the Titan Two USB port labeled OUTPUT;
  3. Connect the other end of the Micro-USB cable to any available USB port on the Xbox Series console.
Note: After the initial device enumeration and authentication, the official Xbox Series controller can be removed from the Titan Two. Alternatively, the Xbox One authentication setup may be used (with the Xbox One output protocol) to authenticate with the Xbox Series X|S.
t2/usage_guides/systems/xboxseries.txt · Last modified: 2021/04/02 20:05 by sNAP