Site Tools
Sidebar
User's Manual
t2:usage_guides:systems:xboxseries
This is an old revision of the document!
Table of Contents
Xbox Series X|S
Important This page is under construction and is not complete. |
All Xbox Series consoles are supported. The Titan Two connects to the Xbox Series X|S emulating an original Xbox Series controller.
Console Polling Rate
Default and maximum USB polling rate supported by the console.
USB Default | 250Hz (4ms) |
USB Maximum | 1000Hz (1ms) |
Controller Protocol
Relevant information about the Xbox Series X|S controller protocol.
USB Polling Interval | 8ms |
Device Authentication | YES enumeration |
Specific Features
Titan Two support for Xbox Series X|S specific features.
Rumble (Vibration) | YES |
Impulse Triggers | YES |
Chatpad | YES Xbox One compatible controller required |
Headset | YES Xbox One compatible controller required |
Wired Connection
Requirements
- Provided Micro-USB cable.
- An official Xbox One Controller
First-time Configuration
- Configure the
Output Protocol
of the Titan Two toUSB Automatic
orUSB Xbox One
.
Regular Usage
- Connect any official Xbox One controller to
INPUT-B
on the Titan Two (for authentication); - Connect the provided Micro-USB cable to the Titan Two USB port labeled
OUTPUT
; - Connect the other end of the Micro-USB cable to any available USB port on the Xbox One.
Note: After the initial device enumeration and authentication, the official Xbox Series controller can be removed from the Titan Two. Alternatively, the Xbox One authentication setup may be used (with the Xbox One output protocol) to authenticate with the Xbox Series X|S. |
t2/usage_guides/systems/xboxseries.1607400956.txt.gz · Last modified: 2020/12/07 23:15 by sNAP