Titan Two and Gtuner IV: PlayStation 5 and Xbox Series X|S
Moderator: OFC-Giorgio
Re: Titan Two and Gtuner IV: PlayStation 5 and Xbox Series X
knell wrote:Sorry, my English is not that good. That's why I asked. Do I understand this correctly, for example, if I use the "hori" in usb port b, no longer disconnect my original ps5 controller in port a?
Yes.
ConsoleTuner Support Team || ConsoleTuner Discord || InputSense Discord
- Mad
- Major General
- Posts: 4536
- Joined: Wed May 22, 2019 5:39 am
Re: Titan Two and Gtuner IV: PlayStation 5 and Xbox Series X
Mad wrote:knell wrote:Sorry, my English is not that good. That's why I asked. Do I understand this correctly, for example, if I use the "hori" in usb port b, no longer disconnect my original ps5 controller in port a?
Yes.
Thanks a lot, I'll try it right tomorrow. I had read that so many times, but I misunderstood it.
-
knell - Staff Sergeant
- Posts: 11
- Joined: Thu Dec 24, 2020 2:13 pm
- Location: Germany
Re: Titan Two and Gtuner IV: PlayStation 5 and Xbox Series X
I'm trying to use the Xbox One Elite Series 2 with my PS5.
I've read through the first post about using a 3rd party ps4 controller in usb port b for authentication. I have an old custom scuff controller (not vantage) that I plugged in to usb port b and the xbox wireless adapter into usb port a and I still get disconnected every 7.5 min.
I'm on the latest version of gtuner and titan two firmware and have the USB Playstation 5 mode set (along with the PS5 set to use usb controllers).
The first post says there is a way in device monitor to tell if it will work for authentication or not, but i do not see any such indication.
Here is the descriptor output from gtuner for my old scuff controller:
I've read through the first post about using a 3rd party ps4 controller in usb port b for authentication. I have an old custom scuff controller (not vantage) that I plugged in to usb port b and the xbox wireless adapter into usb port a and I still get disconnected every 7.5 min.
I'm on the latest version of gtuner and titan two firmware and have the USB Playstation 5 mode set (along with the PS5 set to use usb controllers).
The first post says there is a way in device monitor to tell if it will work for authentication or not, but i do not see any such indication.
Here is the descriptor output from gtuner for my old scuff controller:
[USB DESCRIPTOR]
12 01 00 02 00 00 00 40 4C 05 C4 05 00 01 01 02 00 01 09 02 29 00 01 01 00 C0 FA 09 04 00 00 02 03 00 00 00 09 21 11 01 00 01 22 E3 01 07 05 84 03 40 00 05 07 05 03 03 40 00 05
[STRING 1 DESCRIPTOR]
00 00 00 03 00 00 02 01 80 06 03 01 04 09 00 38
38 03 53 00 6F 00 6E 00 79 00 20 00 43 00 6F 00 6D 00 70 00 75 00 74 00 65 00 72 00 20 00 45 00 6E 00 74 00 65 00 72 00 74 00 61 00 69 00 6E 00 6D 00 65 00 6E 00 74 00
[STRING 2 DESCRIPTOR]
00 00 00 03 00 00 02 01 80 06 03 02 04 09 00 28
28 03 57 00 69 00 72 00 65 00 6C 00 65 00 73 00 73 00 20 00 43 00 6F 00 6E 00 74 00 72 00 6F 00 6C 00 6C 00 65 00 72 00
[INTERFACE 0 HID DESCRIPTOR]
00 00 00 03 00 00 02 01 81 06 22 00 00 00 01 E3
05 01 09 05 A1 01 85 01 09 30 09 31 09 32 09 35 15 00 26 FF 00 75 08 95 04 81 02 09 39 15 00 25 07 35 00 46 3B 01 65 14 75 04 95 01 81 42 65 00 05 09 19 01 29 0E 15 00 25 01 75 01 95 0E 81 02 06 00 FF 09 20 75 06 95 01 15 00 25 7F 81 02 05 01 09 33 09 34 15 00 26 FF 00 75 08 95 02 81 02 06 00 FF 09 21 95 36 81 02 85 05 09 22 95 1F 91 02 85 04 09 23 95 24 B1 02 85 02 09 24 95 24 B1 02 85 08 09 25 95 03 B1 02 85 10 09 26 95 04 B1 02 85 11 09 27 95 02 B1 02 85 12 06 02 FF 09 21 95 0F B1 02 85 13 09 22 95 16 B1 02 85 14 06 05 FF 09 20 95 10 B1 02 85 15 09 21 95 2C B1 02 06 80 FF 85 80 09 20 95 06 B1 02 85 81 09 21 95 06 B1 02 85 82 09 22 95 05 B1 02 85 83 09 23 95 01 B1 02 85 84 09 24 95 04 B1 02 85 85 09 25 95 06 B1 02 85 86 09 26 95 06 B1 02 85 87 09 27 95 23 B1 02 85 88 09 28 95 22 B1 02 85 89 09 29 95 02 B1 02 85 90 09 30 95 05 B1 02 85 91 09 31 95 03 B1 02 85 92 09 32 95 03 B1 02 85 93 09 33 95 0C B1 02 85 A0 09 40 95 06 B1 02 85 A1 09 41 95 01 B1 02 85 A2 09 42 95 01 B1 02 85 A3 09 43 95 30 B1 02 85 A4 09 44 95 0D B1 02 85 A5 09 45 95 15 B1 02 85 A6 09 46 95 15 B1 02 85 F0 09 47 95 3F B1 02 85 F1 09 48 95 3F B1 02 85 F2 09 49 95 0F B1 02 85 A7 09 4A 95 01 B1 02 85 A8 09 4B 95 01 B1 02 85 A9 09 4C 95 08 B1 02 85 AA 09 4E 95 01 B1 02 85 AB 09 4F 95 39 B1 02 85 AC 09 50 95 39 B1 02 85 AD 09 51 95 0B B1 02 85 AE 09 52 95 01 B1 02 85 AF 09 53 95 02 B1 02 85 B0 09 54 95 3F B1 02 85 B1 09 55 95 02 B1 02 85 B2 09 56 95 02 B1 02 C0
-
wolftousen - Private First Class
- Posts: 2
- Joined: Fri Apr 06, 2018 5:44 pm
Re: Titan Two and Gtuner IV: PlayStation 5 and Xbox Series X
On page 1 :
!IMPORTANT! The Titan Two can still be used to play PS5 games even if there is NO ("specialized" controller) third-party PS4 controller connected to it. In this case the Titan Two will automatically reconnect to the console every 7 minutes and 30 seconds in order to reset the console's authentication timeout. The reconnection takes 800 milli-seconds and, depending on the game, can barely be noticed (tested with Demon's Souls).
I have hori rap 4. If I plug this into input B, if I plug xbox elite 2 controls into input A, scripts will work on xbox elite 2 controller? And do I pause for 800 milli-seconds every 7.5 minutes (ps5)
Details such as headphones and vibration do not matter.
!IMPORTANT! The Titan Two can still be used to play PS5 games even if there is NO ("specialized" controller) third-party PS4 controller connected to it. In this case the Titan Two will automatically reconnect to the console every 7 minutes and 30 seconds in order to reset the console's authentication timeout. The reconnection takes 800 milli-seconds and, depending on the game, can barely be noticed (tested with Demon's Souls).
I have hori rap 4. If I plug this into input B, if I plug xbox elite 2 controls into input A, scripts will work on xbox elite 2 controller? And do I pause for 800 milli-seconds every 7.5 minutes (ps5)
Details such as headphones and vibration do not matter.
-
abbasbj - First Sergeant
- Posts: 58
- Joined: Sat Feb 01, 2020 10:16 pm
Re: Titan Two and Gtuner IV: PlayStation 5 and Xbox Series X
abbasbj wrote:I have hori rap 4. If I plug this into input B, if I plug xbox elite 2 controls into input A, scripts will work on xbox elite 2 controller? And do I pause for 800 milli-seconds every 7.5 minutes (ps5)
Details such as headphones and vibration do not matter.
Yes this should work fine.
ConsoleTuner Support Team || ConsoleTuner Discord || InputSense Discord
- Mad
- Major General
- Posts: 4536
- Joined: Wed May 22, 2019 5:39 am
Re: Titan Two and Gtuner IV: PlayStation 5 and Xbox Series X
@J2Kbr
Will the Logitech Wheel protocol ever work with scripting on PS5? It works for me until timeout, but doesn't auth reset.
Will the Logitech Wheel protocol ever work with scripting on PS5? It works for me until timeout, but doesn't auth reset.
-
Glooper - Sergeant First Class
- Posts: 19
- Joined: Sun May 15, 2016 2:33 am
Re: Titan Two and Gtuner IV: PlayStation 5 and Xbox Series X
Hello can anyone help a noob, i just got my Titan Two and want to use my PS4 controller with an attached fps strikepack for the paddles only.
I connected the titan two to my pc updated the latest firmware and software and selected output usb playstation 5 (0 was shown on the LED indicator)
Communication Method is set to USB.
When i connect it to my ps5 via the output connection on the Titan the led indicator just spins non stop and doesn't detect anything.
What am i doing wrong thanks for any help
I connected the titan two to my pc updated the latest firmware and software and selected output usb playstation 5 (0 was shown on the LED indicator)
Communication Method is set to USB.
When i connect it to my ps5 via the output connection on the Titan the led indicator just spins non stop and doesn't detect anything.
What am i doing wrong thanks for any help
-
lrob87 - Corporal
- Posts: 5
- Joined: Fri Jan 05, 2018 12:59 am
Re: Titan Two and Gtuner IV: PlayStation 5 and Xbox Series X
Hi everyone, been waiting patiently for the PS5 full compatibilty since PS5s release - hope its resolved soon.
Question: RDR 2 - Vibration does not work properly at all (its intermittent) and has been like this on all releases / beta releases on 2 separate Titan 2 Units, I have tried all combinations of Output Protocol (PS5 and PS4) with all combinations of polling rates tried different USB leads / short USB leads no difference on 2 separate Titan 2 units. Tried on a second PS5 - no difference.
Does anyone else have this issue (intermittent controller vibration working then not working in RDR 2 on PS5) - or is it because Haptic etc is not resolved yet?
Question: RDR 2 - Vibration does not work properly at all (its intermittent) and has been like this on all releases / beta releases on 2 separate Titan 2 Units, I have tried all combinations of Output Protocol (PS5 and PS4) with all combinations of polling rates tried different USB leads / short USB leads no difference on 2 separate Titan 2 units. Tried on a second PS5 - no difference.
Does anyone else have this issue (intermittent controller vibration working then not working in RDR 2 on PS5) - or is it because Haptic etc is not resolved yet?
-
rtyreman - Private First Class
- Posts: 2
- Joined: Thu Jun 15, 2017 2:46 pm
Re: Titan Two and Gtuner IV: PlayStation 5 and Xbox Series X
Please please im struggling. i cannot get any sound from my PS5 oontroller with the Titan 2 plugged in.
-
printz_keem_fb - Private First Class
- Posts: 2
- Joined: Sun Mar 14, 2021 1:18 am
Re: Titan Two and Gtuner IV: PlayStation 5 and Xbox Series X
Not yet supported, but meanwhile you can either get the audio from the 3rd party controller connected in port B, use a USB sound card, use a wireless headphones, use an HDMI audio extractor or get it from the TV jack.. while we wait for the full emulation of dualsense in a future update
-
Platinum - Corporal
- Posts: 5
- Joined: Sun Mar 21, 2021 5:00 am
Return to Wiimote, Nunchuk and Sensorbar
Who is online
Users browsing this forum: No registered users and 95 guests