Re: Titan Two Firmware 1.05-BETA (FEEDBACK NEEDED)
Posted: Wed Sep 11, 2019 1:17 pm
c40 not working for ps4 even after update. do i still need a ds4 plugged in input a?? thats the only way it will work
High-performance gaming devices.
https://www.consoletuner.com/forum/
https://www.consoletuner.com/forum/viewtopic.php?f=2&t=13510
bruce4c wrote:c40 not working for ps4 even after update. do i still need a ds4 plugged in input a?? thats the only way it will work
Renegade-Spy wrote:This is Raptor I've changed my username. I'll give the c40 a try in a little while once I can get my 2 month old to take a nap.
J2Kbr wrote:bruce4c wrote:c40 not working for ps4 even after update. do i still need a ds4 plugged in input a?? thats the only way it will work
Thanks. With this update the USB Sniffing time was increased from 2 to 3 seconds. Please capture again with the increased time so I can check if the longer time reveals something new.
1) Unplug all controllers from the Titan Two;
2) Connect the output to the PS4 console;
3) Connect the Prog port to your computer;
4) Open Gtuner IV and go to top menu Tools -> "Fetch Descriptors ...";
5) Plug the Astro C40 to any port at the front of the Titan Two;
6) Wait few seconds for this window be update with the captured data;
7) Click on the button "Copy Descriptors" and post here.
Thank you.
nytemare01 wrote:Never done anything like this before... Is it possible to explain in a little more detail how to set this up. Im able to see the stuff on the notepad and the last row available is 50. What do I do from there? Thanks
[Advanced]
beta_tester=true
J2Kbr wrote:nytemare01 wrote:Never done anything like this before... Is it possible to explain in a little more detail how to set this up. Im able to see the stuff on the notepad and the last row available is 50. What do I do from there? Thanks
Now, at the very end of the file, hit the enter key couple times and copy-paste the following:
- Code: Select all
[Advanced]
beta_tester=true