Gtuner IV and Titan Two 1.08 BETA Release

Official news and announcements from the ConsoleTuner team.

Re: Gtuner IV and Titan Two 1.08 BETA Release

Postby t7gergamer » Wed May 06, 2020 12:12 am

J2Kbr wrote:
t7gergamer wrote:Macintosh HD⁩ ▸ ⁨Users⁩ ▸ ⁨(UserName)⁩ ▸ ⁨Library⁩ ▸ ⁨Application Support⁩ ▸ ⁨Gtuner⁩

You have to show hidden files first Shift + Command + >


I tried this already, my Application Support folder does not have Gtuner, even after unhiding files.

Any suggestions or other workarounds?
User avatar
t7gergamer
Master Sergeant
Master Sergeant
 
Posts: 34
Joined: Tue Apr 07, 2020 6:14 pm

Re: Gtuner IV and Titan Two 1.08 BETA Release

Postby J2Kbr » Wed May 06, 2020 12:40 pm

Launch Gtuner IV and check the "Data Dir" in the Output Panel. Is there where you will find "gtuner.cfg".
ConsoleTuner Support Team
User avatar
J2Kbr
General of the Army
General of the Army
 
Posts: 19704
Joined: Tue Mar 18, 2014 1:39 pm

Re: Gtuner IV and Titan Two 1.08 BETA Release

Postby t7gergamer » Wed May 06, 2020 4:02 pm

Thanks for the reply, sorry for being a noob.

I looked all over Gtuner IV but can't find the Output Panel. Thanks for being patient with me!
User avatar
t7gergamer
Master Sergeant
Master Sergeant
 
Posts: 34
Joined: Tue Apr 07, 2020 6:14 pm

Re: Gtuner IV and Titan Two 1.08 BETA Release

Postby J2Kbr » Wed May 06, 2020 7:33 pm

t7gergamer wrote:Thanks for the reply, sorry for being a noob. I looked all over Gtuner IV but can't find the Output Panel. Thanks for being patient with me!

No worries, here is where the output panel is located:
outputpanel.png
outputpanel.png (214.53 KiB) Viewed 16086 times

If does no shows for your, please go to View menu to show the Output Panel.
ConsoleTuner Support Team
User avatar
J2Kbr
General of the Army
General of the Army
 
Posts: 19704
Joined: Tue Mar 18, 2014 1:39 pm

Re: Gtuner IV and Titan Two 1.08 BETA Release

Postby DontAtMe » Wed May 06, 2020 8:27 pm

J2Kbr wrote:The Gtuner 1.08 Beta Rev3 released today has significant improvements on the garbage collection procedures.

I updated to this version, and it seems the garbage collection is not present with this update.

A quick test,
The titanone.gph header is compiling at 2027 bytes, whereas 1.8.1.2 it was compiling at 1547 bytes.

The output panel does not show any discarded variables/functions.

1.8.1.3
Code: Select all
GPC: Preprocessor started.
GPC: First-pass started.
GPC: Variables: Global: 4, Local: 33, Parameters: 40, Pointers: 1, Constants: 2, Labels: 0, Functions: 30, Combos: 0
GPC: Memory usage: Static: 28 bytes (2.73%), Dynamic: 184 bytes (17.97%)
GPC: Second-pass started.
GPC: Unreferenced: dbyte, dchar, dword, remap, unmap, get_pvar, set_pvar, swap, sensitivity, deadzone, stickize, get_led, set_led, set_ledx, get_ledx, reset_leds, get_rumble, block_rumble, isqrt, irand, turn_off, ps4_touchpad, ps4_set_touchpad, output_protocol, output_reconnection, get_battery, get_console, get_controller
GPC: Assembler started.
GPC: Bytecode usage: 2027 bytes (24.74%)

1.8.1.2
Code: Select all
GPC: Preprocessor started.
GPC: First-pass started.
GPC: Variables: Global: 4, Local: 33, Parameters: 40, Pointers: 1, Constants: 2, Labels: 0, Functions: 30, Combos: 0
GPC: Memory usage: Static: 28 bytes (2.73%), Dynamic: 184 bytes (17.97%)
GPC: Second-pass started.
GPC: Unreferenced: dbyte, dchar, dword, remap, unmap, get_pvar, set_pvar, swap, sensitivity, deadzone, stickize, get_led, set_led, set_ledx, get_ledx, reset_leds, get_rumble, block_rumble, isqrt, irand, turn_off, ps4_touchpad, ps4_set_touchpad, output_protocol, output_reconnection, get_battery, get_console, get_controller
GPC: Garbage collection started.
GPC: Discarded: dbyte, dchar, dword, remap, unmap, get_pvar, set_pvar, swap, sensitivity, deadzone, stickize, get_led, set_led, set_ledx, get_ledx, reset_leds, get_rumble, block_rumble, isqrt, irand, turn_off, ps4_touchpad, ps4_set_touchpad, output_protocol, output_reconnection, get_battery, get_console, get_controller
GPC: Assembler started.
GPC: Bytecode usage: 1547 bytes (18.88%)
GPC success: GPC Build succeeded with 0 warning(s).
User avatar
DontAtMe
Captain
Captain
 
Posts: 494
Joined: Tue Oct 02, 2018 4:49 am

Re: Gtuner IV and Titan Two 1.08 BETA Release

Postby J2Kbr » Wed May 06, 2020 8:33 pm

I forgot to mention, sorry. Starting from 1.08 Beta Rev 3, the garbage collection must be explicit enabled at: Preferences -> GPC Compiler.
ConsoleTuner Support Team
User avatar
J2Kbr
General of the Army
General of the Army
 
Posts: 19704
Joined: Tue Mar 18, 2014 1:39 pm

Re: Gtuner IV and Titan Two 1.08 BETA Release

Postby t7gergamer » Thu May 07, 2020 1:19 am

J2Kbr wrote:If does no shows for your, please go to View menu to show the Output Panel.


Thank you so much, sir! Loving this device, Xbox Elite controller works perfectly now.

With revision 3 out, would you recommend deleting the earlier versions (1.07 & 1.08)?
User avatar
t7gergamer
Master Sergeant
Master Sergeant
 
Posts: 34
Joined: Tue Apr 07, 2020 6:14 pm

Re: Gtuner IV and Titan Two 1.08 BETA Release

Postby hammer » Thu May 07, 2020 11:34 am

An chance in seeing the UWP support for CV in the future or no high priority for now?
Thx for your work and effort!
User avatar
hammer
Sergeant Major
Sergeant Major
 
Posts: 104
Joined: Sun Sep 30, 2018 1:36 pm
Location: Germany

Re: Gtuner IV and Titan Two 1.08 BETA Release

Postby J2Kbr » Thu May 07, 2020 6:45 pm

t7gergamer wrote:
J2Kbr wrote:If does no shows for your, please go to View menu to show the Output Panel.

Thank you so much, sir! Loving this device, Xbox Elite controller works perfectly now. With revision 3 out, would you recommend deleting the earlier versions (1.07 & 1.08)?

You are welcome. If Rev 3 is fully working for you there is no needed to keep previous versions. :smile0517:
ConsoleTuner Support Team
User avatar
J2Kbr
General of the Army
General of the Army
 
Posts: 19704
Joined: Tue Mar 18, 2014 1:39 pm

Re: Gtuner IV and Titan Two 1.08 BETA Release

Postby J2Kbr » Thu May 07, 2020 6:48 pm

hammer wrote:An chance in seeing the UWP support for CV in the future or no high priority for now? Thx for your work and effort!

Thank you hammer. I am actively researching for solutions to add support to UWP Apps for Window Capture. The GDI+ Library suggested by PaulaTheKoala seems the way to go.
ConsoleTuner Support Team
User avatar
J2Kbr
General of the Army
General of the Army
 
Posts: 19704
Joined: Tue Mar 18, 2014 1:39 pm

PreviousNext

Return to News and Announcements

Who is online

Users browsing this forum: Soulja06 and 20 guests