With Beloader works Apex Legends Ps5 Version and Gt7.I think all others Ps5 Games works with Beloader method.
I was dealing with the Beloader issue because I also had the red light problem. I was able to solve it for myself. Now I can play Ps5 games with the T2 without any problems and without any lag from the controller.So I mostly only play the Apex Ps5 version with cv.Now to the important things. I set up the Beloader with the firmware Lan (firmware can be found on the loader page). My Ps5 and my Beloader are each connected to the router with their own Lan cable. That is important.The Beloader must be connected to the back of the Playstation5, otherwise it will not work.
So you put the Beloader in the in the back of Ps5, you put a compatible Lan adapter in the Beloader. Only certain adapters work! I will then give a few more links.
The Lan cable is plugged into the adapter. I plugged the T2 cable (T2 output) into the USB hub of the Lan adapter. In the Gtuner, I set the output protocol to USB Playstion 4 in the device configuration.This is important!
Now I come to the problem with the red lights. When I connected the Beloader to the Ps5 (button on the Beloader) only red lights were visible on the T2. Initially still had the Mini Hori in port A of T2. Needed it I still use it for the output protocol Ps5, which I previously set in T2. In the meantime I pulled it out because I don't need a controller for authentication in the "USB Playstion 4" output protocol.So now briefly written when I had the Hori Mini in port A of T2:
The Beloader is connected to the Ps5 (green permanent light on the Beloader). There are red lights on the T2. First I pulled the Hori Mini out of port A on the T2. Then I pulled the USB T2 cable out of the Lan adapter I put this cable back into the Lan adapter and then the Hori Mini into port A of the T2. All the lights are green afterwards!
I have to do this every time I turn the PS5 back on. I hope I could help with this.
In the meantime I no longer have the Hori Mini in port A. It still works. Only now when I start the Ps5 I have to pull the Beloader out of the Ps5, then put it back in and press the button on the Beloader to connect. But the lights are complete green on the T2. It's a little effort, but finally you can play the Ps5 games with the T2 and without delay from the controller!
Look in the video description which Lan adapters work:
https://www.youtube.com/watch?v=-TC84cf7b_4This is my Lan Adapter which works:
https://www.amazon.de/gp/product/B00WT1 ... 6bc8c89269As I said, there are only certain Lan adapters that work (has something to do with the chip)
I hope I could help
Edit: And you dont need an extra PC for Remote Play!