USB HID: Warzone / Modern Warfare : Native Mouse & Keyboard
42 posts
• Page 1 of 5 • 1, 2, 3, 4, 5
USB HID: Warzone / Modern Warfare : Native Mouse & Keyboard
USB HID : Warzone / Modern Warfare : Native Mouse & Keyboard
This script is for native Mouse and Keyboard:
The connected Output Port Device will see the mouse/keyboard as mouse/keyboard.
Script Features: Staged Anti Recoil, 7 Weapon Profiles, key toggles
Usage Examples:
Script Features:
7 Weapon Profiles
Staged Anti Recoil
Rapid Fire
Keys for on/off/profile toggles
Keys to load different T2 slots for more quick access to different Weapon Profiles
Script Feedback:
The T2 LED will show:
Purple: Script disabled
Green: Primary Weapon active
Blue: Secondary Weapon active
The T2 segment display will show:
'd.' : Script disabled
'i .' : Primary Weapon active
'ii.' : Secondary Weapon active
Script Setting Notes:
The script uses the T2 in Output Protocol Mode "USB Multi Interface HID".
Configure the script do change it temporary or configure your T2 manually:
Anti Recoil Editing Mode:
Enter/Exit Editing Mode : hold INSERT key >1 sec : Saves settings on Exit
Close Editing Mode : PAUSE key : Doesn't saves settings (but changes values are still used by the script)
Vertical Value Adjust : ARROW Up/Down Keys : Up -, Down +
Horizontal Value Adjust : ARROW Left/Right : Left -, Right +
Time Adjust : Hold DELETE : Time when to apply the second value
Time Vertical Adjust : DELETE + ARROW Up/Down : Up -, Down +
Time Horizontal Adjust : DELETE + ARROW Left/Right : Left -, Right +
2. Value Adjust : Hold END : 2. Value editing
2. Vertical Value Adjust : END + ARROW Up/Down : Up -, Down +
2. Horizontal Value Adjust : END + ARROW Left/Right : Left -, Right +
Faster Adjustment : Hold SHIFT + press Arrows : 10x modificator, can be used for all editings
Game Setting Notes:
Disable "Automatic Weapon Change on Out of Ammo" to minimize the chance for the script weapon slot tracking get out of sync.
... Work in Progress ...
This script is for native Mouse and Keyboard:
The connected Output Port Device will see the mouse/keyboard as mouse/keyboard.
Script Features: Staged Anti Recoil, 7 Weapon Profiles, key toggles
Usage Examples:
- Input Setup Options:
- Mouse and Keyboard directly into T2
- GTuner IV KMG Capture
- Output Setup Options:
- T2 Out --> PC
- T2 Out --> Xim -> Console/PC
- T2 Out --> Console*
*Console needs to support keyboard and mouse as input device
Script Features:
7 Weapon Profiles
Staged Anti Recoil
Rapid Fire
Keys for on/off/profile toggles
Keys to load different T2 slots for more quick access to different Weapon Profiles
Script Feedback:
The T2 LED will show:
Purple: Script disabled
Green: Primary Weapon active
Blue: Secondary Weapon active
The T2 segment display will show:
'd.' : Script disabled
'i .' : Primary Weapon active
'ii.' : Secondary Weapon active
Script Setting Notes:
The script uses the T2 in Output Protocol Mode "USB Multi Interface HID".
Configure the script do change it temporary or configure your T2 manually:
Anti Recoil Editing Mode:
Enter/Exit Editing Mode : hold INSERT key >1 sec : Saves settings on Exit
Close Editing Mode : PAUSE key : Doesn't saves settings (but changes values are still used by the script)
Vertical Value Adjust : ARROW Up/Down Keys : Up -, Down +
Horizontal Value Adjust : ARROW Left/Right : Left -, Right +
Time Adjust : Hold DELETE : Time when to apply the second value
Time Vertical Adjust : DELETE + ARROW Up/Down : Up -, Down +
Time Horizontal Adjust : DELETE + ARROW Left/Right : Left -, Right +
2. Value Adjust : Hold END : 2. Value editing
2. Vertical Value Adjust : END + ARROW Up/Down : Up -, Down +
2. Horizontal Value Adjust : END + ARROW Left/Right : Left -, Right +
Faster Adjustment : Hold SHIFT + press Arrows : 10x modificator, can be used for all editings
Game Setting Notes:
Disable "Automatic Weapon Change on Out of Ammo" to minimize the chance for the script weapon slot tracking get out of sync.
... Work in Progress ...
-
Scachi - Brigadier General
- Posts: 3044
- Joined: Wed May 11, 2016 6:25 am
- Location: Germany
Re: USB HID: Warzone / Modern Warfare : Native Mouse & Keybo
Hi,
thanks for your job!
Works good for me but the switch between the Primary/Secondary only works with the mouseweehl. Not with any key. I try to set it, for example to Key_5/6, but no effect.
thanks for your job!
Works good for me but the switch between the Primary/Secondary only works with the mouseweehl. Not with any key. I try to set it, for example to Key_5/6, but no effect.
-
pl711 - Private First Class
- Posts: 2
- Joined: Fri Oct 30, 2020 2:37 pm
Re: USB HID: Warzone / Modern Warfare : Native Mouse & Keybo
Thank you for reporting, yes it looks like the direct keys to swap between primary/secondary are not working correctly.
The key assigned to primary is working fine for me. The key assigned to secondary isn't working.
I'll try to fix that asap.
Fixed it. Please redownload the script from the Online Resource.
The key assigned to primary is working fine for me. The key assigned to secondary isn't working.
I'll try to fix that asap.
Fixed it. Please redownload the script from the Online Resource.
-
Scachi - Brigadier General
- Posts: 3044
- Joined: Wed May 11, 2016 6:25 am
- Location: Germany
Re: USB HID: Warzone / Modern Warfare : Native Mouse & Keybo
Hi Scachi,
first of all: nice work! i was looking for that mousewheel profile switch in the past and also tried to solve it on my own - but failed :-D
May i ask you to implement a way to change the brightness of the status LED. It's too bright for me.
Also i'm struggling to set the second value with the hotkeys.
1. Long press INS
2. Hold END + Arrow up/down
manipulates the first value, not the second. Am is missing something?
Cheers!
first of all: nice work! i was looking for that mousewheel profile switch in the past and also tried to solve it on my own - but failed :-D
May i ask you to implement a way to change the brightness of the status LED. It's too bright for me.
Also i'm struggling to set the second value with the hotkeys.
1. Long press INS
2. Hold END + Arrow up/down
manipulates the first value, not the second. Am is missing something?
Cheers!
-
NinetyEight - Corporal
- Posts: 5
- Joined: Sat Nov 07, 2020 1:05 pm
Re: USB HID: Warzone / Modern Warfare : Native Mouse & Keybo
You can change the brightness via the "Device Configuration" in GTuner IV (bottom right).
You are right, the second value changing isn't working.
Ok..fixed that. Please redownload from the Online Resource.
You are right, the second value changing isn't working.
Ok..fixed that. Please redownload from the Online Resource.
-
Scachi - Brigadier General
- Posts: 3044
- Joined: Wed May 11, 2016 6:25 am
- Location: Germany
Re: USB HID: Warzone / Modern Warfare : Native Mouse & Keybo
the LED brightness in "device config" works for all the indicators except the "disabled" (pink) one. this one is very sensitive when moving the brightness slider. the brightness is at 100% before reaching the first tickmark on the brightness slider (sry i m no native speeker, dont know the name of it.).
maybe theres a factor missing, it might go 10x faster than it should or something like that.
-
NinetyEight - Corporal
- Posts: 5
- Joined: Sat Nov 07, 2020 1:05 pm
Re: USB HID: Warzone / Modern Warfare : Native Mouse & Keybo
This is great! I am hoping to adjust this script to work in Apex legends, as I have been running into trouble creating my own staged anti-recoil for that game. Is there any chance that you will be posting or could PM the base code?
-
Skeletor42 - Corporal
- Posts: 4
- Joined: Tue Nov 10, 2020 3:51 pm
Re: USB HID: Warzone / Modern Warfare : Native Mouse & Keybo
Skeletor42 wrote:This is great! I am hoping to adjust this script to work in Apex legends, as I have been running into trouble creating my own staged anti-recoil for that game. Is there any chance that you will be posting or could PM the base code?
My script "USB-HID Antirecoil" is available as source in the Online Resource, it has staged anti recoil.
-
Scachi - Brigadier General
- Posts: 3044
- Joined: Wed May 11, 2016 6:25 am
- Location: Germany
Re: USB HID: Warzone / Modern Warfare : Native Mouse & Keybo
Scachi wrote:Skeletor42 wrote:This is great! I am hoping to adjust this script to work in Apex legends, as I have been running into trouble creating my own staged anti-recoil for that game. Is there any chance that you will be posting or could PM the base code?
My script "USB-HID Antirecoil" is available as source in the Online Resource, it has staged anti recoil.
Gotcha, I must not understand what staged recoil refers to. I was referring to a change in the amount of recoil applied over time, for example stronger compensation for the first 700ms then weaker compensation for the next 1000ms. So what I am referring to is more antirecoil "decay" I guess. I was able to modify your USB-HID script to have antirecoil decay over time, thanks!
-
Skeletor42 - Corporal
- Posts: 4
- Joined: Tue Nov 10, 2020 3:51 pm
42 posts
• Page 1 of 5 • 1, 2, 3, 4, 5
Return to User's Script Documentation
Who is online
Users browsing this forum: No registered users and 135 guests