KMG Capture not working after update
6 posts
• Page 1 of 1
KMG Capture not working after update
I just did the newest update and now KMG capture is not working with the Titan 2. It was fine before the update.
- patelasaur
- Sergeant
- Posts: 8
- Joined: Thu Nov 12, 2020 5:44 pm
Re: KMG Capture not working after update
I've got the same problem. Hopefully it gets fixed soon
-
gman1212 - First Sergeant
- Posts: 44
- Joined: Sat Apr 11, 2020 4:14 pm
Re: KMG Capture not working after update
Hi, Please post this issue to github if you haven't already: https://github.com/J2Kbr/GtunerIV
ConsoleTuner Support Team || ConsoleTuner Discord || InputSense Discord
- Mad
- Major General
- Posts: 4536
- Joined: Wed May 22, 2019 5:39 am
Re: KMG Capture not working after update
patelasaur wrote:I just did the newest update and now KMG capture is not working with the Titan 2. It was fine before the update.
I opened an error report on get hub so you can follow it over there. I think I figured out what's going on. On the update that was just released it seems to be ignoring adaptive equipment. I use a smartnav mouse and voice macros for my setup which are being completely ignored after the update but the physical mouse and keyboard are sending the input just fine. I seen a post of yours saying you used in adaptive controller so it's probably a similar problem to mine. Here's the link on get hub so you can follow.
https://github.com/J2Kbr/GtunerIV/issues/410
-
gman1212 - First Sergeant
- Posts: 44
- Joined: Sat Apr 11, 2020 4:14 pm
Re: KMG Capture not working after update
gman1212 wrote:patelasaur wrote:I just did the newest update and now KMG capture is not working with the Titan 2. It was fine before the update.
I opened an error report on get hub so you can follow it over there. I think I figured out what's going on. On the update that was just released it seems to be ignoring adaptive equipment. I use a smartnav mouse and voice macros for my setup which are being completely ignored after the update but the physical mouse and keyboard are sending the input just fine. I seen a post of yours saying you used in adaptive controller so it's probably a similar problem to mine. Here's the link on get hub so you can follow.
https://github.com/J2Kbr/GtunerIV/issues/410
Thanks! I do use voice commands to simulate key presses with a software called VoiceMacro but it didn't seem to work when I tested with a normal keyboard too.
- patelasaur
- Sergeant
- Posts: 8
- Joined: Thu Nov 12, 2020 5:44 pm
Re: KMG Capture not working after update
No problem! When I tested the regular mouse and keyboard I had the output protocol set to PlayStation four or five. Using USB Multi HID interface that was suggested over on get hub makes it completely unresponsive. You can test that but if it still doesn't work I would add that to the report.
-
gman1212 - First Sergeant
- Posts: 44
- Joined: Sat Apr 11, 2020 4:14 pm
6 posts
• Page 1 of 1
Who is online
Users browsing this forum: No registered users and 112 guests