GTuner intialization problem
Posted: Mon May 03, 2021 11:54 pm
GTuner on Windows 10
Titan 2 on ps4
Bluetooth module wireless connection to DS 4
The cord from pc to T2
The cord plugged into PS4
Problem: GTuner does not load scripts saved to T2 memory card is the problem except under certain conditions.
It will only load memory card scripts if GTuner is opened before powering the T2
It will not load the memory card scripts if the T2 is powered by PS4 and then connected to PC with Gtuner opened.
It will not load the memory card scripts if Gtuner is not opened before connecting the T2 with PC being the only power source.
When connecting the GTuner on PC no scripts load unless i remove the usb cord and replug it under these two conditions.
1. if PS4 is on first or
2. if gturner is not opened before making the connection to T2 with the PS4 off. I will have to unplug the usb connection to T2 and re plug it in then they load fine.
This causes me to continuous have to unplug the usb and unplug the ps4 before opening Gtuner.
I can find no settings that change this I have tried to address it here before but no one seems to think this is a thing.
I have real tight usb ports and do not want to plug and unplug this often it will loosen the port.
Thanks for the hard work love the T2 it is awesome this will cause equipment failure more than likely at some point.
One more thing if i use the T2 own power source it will not load memory scripts until i unplug power source and pc then Turn Gtuner on and then connect to T2.
It is obviously choosing to only make a connection on initialization if it is activated after being opened and only be T2 having the PC as only power source. So power is intializing the load only as first power source is PC after GTuner is opened, which if T2 is a switch then this is maybe settings or bad software.
Titan 2 on ps4
Bluetooth module wireless connection to DS 4
The cord from pc to T2
The cord plugged into PS4
Problem: GTuner does not load scripts saved to T2 memory card is the problem except under certain conditions.
It will only load memory card scripts if GTuner is opened before powering the T2
It will not load the memory card scripts if the T2 is powered by PS4 and then connected to PC with Gtuner opened.
It will not load the memory card scripts if Gtuner is not opened before connecting the T2 with PC being the only power source.
When connecting the GTuner on PC no scripts load unless i remove the usb cord and replug it under these two conditions.
1. if PS4 is on first or
2. if gturner is not opened before making the connection to T2 with the PS4 off. I will have to unplug the usb connection to T2 and re plug it in then they load fine.
This causes me to continuous have to unplug the usb and unplug the ps4 before opening Gtuner.
I can find no settings that change this I have tried to address it here before but no one seems to think this is a thing.
I have real tight usb ports and do not want to plug and unplug this often it will loosen the port.
Thanks for the hard work love the T2 it is awesome this will cause equipment failure more than likely at some point.
One more thing if i use the T2 own power source it will not load memory scripts until i unplug power source and pc then Turn Gtuner on and then connect to T2.
It is obviously choosing to only make a connection on initialization if it is activated after being opened and only be T2 having the PC as only power source. So power is intializing the load only as first power source is PC after GTuner is opened, which if T2 is a switch then this is maybe settings or bad software.