Need help adjusting script! Thanks in advance!
6 posts
• Page 1 of 1
Need help adjusting script! Thanks in advance!
by SweatyPapi » Wed Apr 08, 2020 11:01 am
Can someone help me add hair triggers to this script? These are what I need:
COD MW:
1. Hair Triggers
2. Fix Sliding to where when I press B, it double slides to use the slide cancel mechanic in COD
3. fix anti recoil for Xim4
COD MW:
1. Hair Triggers
2. Fix Sliding to where when I press B, it double slides to use the slide cancel mechanic in COD
3. fix anti recoil for Xim4
- Code: Select all
#pragma METAINFO("Crack Aim", 1, 0, "SweatyPapi")
/* *****************************************************************************
<cfgdesc>
[BO4 Special Edtion]
color = #008000
shortdesc = <font color="green">Runtime operations Use Interactive Configurations for changes to settings.
control = info
[RAPID FIRE SETTINGS:]
color = #008000
collapsible = 2
shortdesc = <font color="brown">ENABLE:<font color="green">Rapid Fire?</font>
byteoffset = 0
bitsize = 8
control = radiobox
default = 0
item = Rapidfire OFF
item = Rapidfire ON
[RAPID FIRE OPTIONS:]
group = true
shortdesc = <font color="brown">SHOTS PER SECOND:</font> <font color="green"> Set to desired sps setting 1~25 sps.</font>
byteoffset = 1
bitsize = 32
control = spinboxf
default = 165
minimum = 10
maximum = 250
step = 05
decimals = 1
[ANTI RECOIL SETTINGS:]
color = #008000
collapsible = 2
shortdesc = <font color="brown">ENABLE:<font color="green"> Anti Recoil?
byteoffset = 10
bitsize = 1
bitoffset = 7
control = checkbox
default = 1
item = Anti Recoil ON
[Min Anti Recoil Percent]
group = true
shortdesc = <font color="brown">Minimum Percentage:<font color="green"> Anti Recoil to apply during aim stick movement.
byteoffset = 11
bitsize = 32
control = spinboxf
default = 200
minimum = 0
maximum = 1000
step = 10
decimals = 1
[Stick Noise Remover]
group = true
shortdesc = <font color="brown">STICK NOISE:<font color="green"> Set to the resting dead zone values for your right stick.
byteoffset = 15
bitsize = 32
control = spinboxf
default = 800
minimum = 0
maximum = 10000
step = 50
decimals = 2
[Anti Recoil Delay]
group = true
shortdesc = <font color="brown">Anti Recoil Delay:<font color="green"> (In MS) after fire button is pressed.
byteoffset = 19
bitsize = 16
control = slider
default = 0
minimum = 0
maximum = 1000
step = 5
[Standing Anti Recoil Settings]
group = true
shortdesc = <font color="brown">Anti Recoil:<font color="green"> vertical pull force compensation.
byteoffset = 21
bitsize = 32
control = spinboxf
default = 1800
minimum = -10000
maximum = 10000
step = 10
decimals = 2
[Standing Anti Recoil H Settings]
group = true
shortdesc = <font color="brown">Anti Recoil:<font color="green"> horizontal pull force compensation.
byteoffset = 25
bitsize = 32
control = spinboxf
default = 00000
minimum = -10000
maximum = 10000
step = 10
decimals = 2
[Anti Recoil Timed]
group = true
shortdesc = <font color="brown">Anti Recoil Timed:<font color="green"> (In MS) length of top setting compensation then applying second settings.
byteoffset = 29
bitsize = 16
control = slider
default = 500
minimum = 0
maximum = 2500
step = 5
[Anti Recoil Settings]
group = true
shortdesc = <font color="brown">Anti Recoil:<font color="green"> vertical pull force compensation.
byteoffset = 31
bitsize = 32
control = spinboxf
default = 1800
minimum = -10000
maximum = 10000
step = 10
decimals = 2
[Anti Recoil H Settings]
group = true
shortdesc = <font color="brown">Anti Recoil:<font color="green"> horizontal pull force compensation.
byteoffset = 35
bitsize = 32
control = spinboxf
default = 00000
minimum = -10000
maximum = 10000
step = 10
decimals = 2
[AIM ASSIST SETTINGS:]
color = #008000
collapsible = 2
[AIM ASSIST]
group = true
shortdesc = <font color="green">Works when ads is applied or fired.</font>
byteoffset = 39
bitsize = 1
bitoffset = 7
control = checkbox
default = 1
item = Enable Aim assist
[TURBO MELEE SETTINGS:]
color = #008000
collapsible = 2
[TURBO MELEE MODz]
group = true
shortdesc = <font color="green">Options for Turbo Melee.</font>
byteoffset = 54
bitsize = 8
control = radiobox
default = 2
item = Disable
item = Hold for normal press or double tap for turbo melee.
item = Hold for turbo melee or double tap for normal press.
[AIM ABUSE SETTINGS:]
color = #008000
collapsible = 2
[Aim_Abuse Settings]
group = true
shortdesc = <font color="green">Enable Aim Abuse?</font>
byteoffset = 56
bitsize = 1
bitoffset = 7
control = checkbox
default = 0
item = Aim Abuse
[Auto Aim Hold Time]
group = true
shortdesc = <font color="brown">Auto Aim Hold Time:</font> <font color="green">Configure the time period, in milli-seconds, of which the ADS(Scope) button should be pressed when the aim-assist abuse is activated.</font>
byteoffset = 57
bitsize = 16
control = spinbox
default = 150
minimum = 20
maximum = 5000
step = 50
[Auto Aim Release Time]
group = true
shortdesc = <font color="brown">Auto Aim Release Time:</font> <font color="green">Configure the time period, in milli-seconds, of which the ADS(Scope) button should be released when the aim-assist abuse is activated.</font>
byteoffset = 59
bitsize = 16
control = spinbox
default = 50
minimum = 10
maximum = 5000
step = 5
[Auto Aim Fire Pre Pause Time]
group = true
shortdesc = <font color="brown">Auto Aim Fire Pre Pause Time:</font> <font color="green">Configure the time period, in milli-seconds, to pause rapid fire for given time before ads release.</font>
byteoffset = 61
bitsize = 16
control = spinbox
default = 5
minimum = 0
maximum = 5000
step = 5
[Auto Aim Fire Post Pause Time]
group = true
shortdesc = <font color="brown">Auto Aim Fire Post Pause Time:</font> <font color="green">Configure the time period, in milli-seconds, to pause rapid fire for given time after ads release.</font>
byteoffset = 63
bitsize = 16
control = spinbox
default = 50
minimum = 0
maximum = 5000
step = 5
[AUTO SPRINT SETTINGS:]
color = #008000
collapsible = 2
[Auto Sprint]
group = true
shortdesc = <font color="green">Easy sprint: hold left stick forward too sprint. Adjust reload delay for weapon so you don't sprint cancel reload. Adjust reload cancel the same as delay just incase anytime of reloading and enemy is near engage stick forward fast to get out of reloading.</font>
byteoffset = 67
bitsize = 1
bitoffset = 7
control = checkbox
default = 1
item = Enable Easy Sprint
[Reload Delay]
group = true
shortdesc = <font color="brown">Reload Delay:<font color="green"> (In MS) length that it takes when you first press reload to when magazine clicks in weapon.
byteoffset = 68
bitsize = 16
control = slider
default = 2000
minimum = 0
maximum = 3500
step = 5
[Reload Cancel]
group = true
shortdesc = <font color="brown">Reload Cancel:<font color="green"> (In MS) length of time you sprint cancel reloading in case needing break out to fire on enemy.
byteoffset = 70
bitsize = 16
control = slider
default = 2000
minimum = 0
maximum = 3500
step = 5
[STRAFE SETTINGS:]
color = #008000
collapsible = 2
[Strafe MODz]
group = true
shortdesc = <font color="green">Strafe option.</font>
byteoffset = 115
bitsize = 8
control = radiobox
default = 0
item = Disabled
item = Enabled Strafe (Adjustable)
item = Enabled Strafe(Hip only)(Adjustable)
[Strafe Adjustable Setting]
group = true
shortdesc = <br><b><font color="green">Strafe Adjustable Setting:</font></b>
byteoffset = 116
bitsize = 32
control = spinbox
default = 200
minimum = 0
maximum = 2000
step = 1
</cfgdesc>
***************************************************************************** */
#include <display.gph>
#define wait(a) wait((int)a);
#define float fix32
uint8 rapid_fire;
fix32 sps;
fix32 hold_time, rest_time;
uint8 bUseAntiRecoil;
float ARecoil_H;
float ARecoil_V;
uint16 ARecoilDelay;
float ARecoil_H2;
float ARecoil_V2;
uint16 ARecoilTimed;
float MinARecoilPercent;
float StickNoise;
//Aim Abuse
bool bUseAimAbuse = FALSE;
int AutoAimHoldTime;
int AutoAimReleaseTime;
int AutoAimFirePrePauseTime;
int AutoAimFirePostPauseTime;
bool bAutoAimPauseFire = FALSE;
bool sprint_toggle;
bool AimAssist;
//Turbo Melee
uint8 bUseTurboMelee = 2;
bool turboMelee = TRUE;
bool fast_melee;
uint8 STRAFE_MODz;
uint32 STRAFE_SHUFFLE;
uint16 reload_cancel;
uint16 reload_delay;
init
{
pmem_load();
rapid_fire = pmem_read(0);
pmem_read(1, &sps);
printf("<center><font style='color:blue;font-size:14px;',><br>RAPID FIRE: %u", rapid_fire);
update_rapidfire();
bUseAntiRecoil = (pmem_read(10) >> 7) & 0b1;
printf("<center><font style='color:red;font-size:14px;',><br>ANTI RECOIL: %d", bUseAntiRecoil);
pmem_read(11, &MinARecoilPercent);
pmem_read(15, &StickNoise);
pmem_read(19, &ARecoilDelay);
pmem_read(21, &ARecoil_V);
pmem_read(25, &ARecoil_H);
pmem_read(29, &ARecoilTimed);
pmem_read(31, &ARecoil_V2);
pmem_read(35, &ARecoil_H2);
update_anti_recoil();
AimAssist = (pmem_read(39) >> 7) & 0b1;
bUseTurboMelee = pmem_read(54);
bUseAimAbuse = (pmem_read(56) >> 7) & 0b1;
pmem_read(57, &AutoAimHoldTime);
pmem_read(59, &AutoAimReleaseTime);
pmem_read(61, &AutoAimFirePrePauseTime);
pmem_read(63, &AutoAimFirePostPauseTime);
sprint_toggle = (pmem_read(67) >> 7) & 0b1;
pmem_read(68, &reload_delay);
pmem_read(70, &reload_cancel);
STRAFE_MODz = pmem_read(115);
pmem_read(116, &STRAFE_SHUFFLE);
}
main {
// - RAPIDFIRE - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
if(get_actual(BUTTON_5)) {
if (bAutoAimPauseFire == FALSE)
{
set_val(BUTTON_5, 100.0);
if(rapid_fire == 1)
combo_run(RapidFire);
}
}else combo_stop(RapidFire);
if (bUseAntiRecoil)
{
if (abs(get_actual(STICK_1_X)) < StickNoise) set_val(STICK_1_X, 0.0);
if (abs(get_actual(STICK_1_Y)) < StickNoise) set_val(STICK_1_Y, 0.0);
if (abs(get_actual(STICK_2_X)) < StickNoise) set_val(STICK_2_X, 0.0);
if (abs(get_actual(STICK_2_Y)) < StickNoise) set_val(STICK_2_Y, 0.0);
if (event_active(BUTTON_5))
{
combo_run(recoil_compensation);
}
if(event_release(BUTTON_5))
{
combo_stop(recoil_compensation);
}
}
if(AimAssist == 1)
{
if(get_val(BUTTON_8)&& !get_actual(BUTTON_5)) {
combo_run(ARA);
} else
if(get_val(BUTTON_5)) {
combo_run(ARAF);
}
if(is_active(STICK_1_X)){combo_stop(ARA);combo_stop(ARAF);}
if(is_active(STICK_1_Y)){combo_stop(ARA);combo_stop(ARAF);}
}
if(turboMelee == 1)
{
if(bUseTurboMelee == 1)
{
if(fast_melee)
{
if(get_val(BUTTON_6))
{
combo_run(TurboMelee);
}else
{
fast_melee = 0;
}
}else if(event_active(BUTTON_6) && time_release(BUTTON_6) < 140)
{
fast_melee = 1;
}
}
if(bUseTurboMelee == 2)
{
if(get_actual(BUTTON_6))
{
combo_run(TurboMelee);
}else if(event_release(BUTTON_6))
{
combo_stop(TurboMelee);
}
if(event_active(BUTTON_6) && time_release(BUTTON_6) < 140)
{
fast_melee = !fast_melee;
}else if(event_release(BUTTON_6) && time_active(BUTTON_6) <= 140)
{
fast_melee = !fast_melee;
}
if(fast_melee)
{
if(get_actual(BUTTON_6))
{
combo_stop(TurboMelee);
set_val(BUTTON_6, 100.0);
}else if(event_release(BUTTON_6))
{
fast_melee = FALSE;
}
}
}
}
if (bUseAimAbuse)
{
if (get_actual(BUTTON_8) && !get_actual(BUTTON_5))
{
combo_run(AimAbuse);
}
else
{
bAutoAimPauseFire = FALSE;
combo_stop(AimAbuse);
}
}
if(sprint_toggle)
{
// - SPRINT MOD - - - - - - - - - - - - - - - - - - - - - - - - - - -
if(get_val(STICK_2_Y) < -20.0) {
combo_run(EasySprint);
}
if(get_actual(BUTTON_5) || get_actual(BUTTON_8) ||
get_actual(BUTTON_4) || get_actual(BUTTON_7)) {
combo_stop(EasySprint);
}
if(is_release(BUTTON_17) && time_active(BUTTON_17) <= reload_delay) {
combo_stop(EasySprint);
}
if(is_active(STICK_2_Y) && time_active(STICK_2_Y) < reload_cancel)reload_delay = 0;
}
if(STRAFE_MODz == 1) {
if(get_val(BUTTON_5)) {
combo_run(strafe);
}else if(event_release(BUTTON_5)) {
combo_stop(strafe);
}
if(is_active(STICK_2_X) || is_active(STICK_2_Y)) {
combo_stop(strafe);
}
}
if(STRAFE_MODz == 2) {
if((!get_val(BUTTON_8) && get_val(BUTTON_5)) || (event_release(BUTTON_8) && get_val(BUTTON_5))) {
combo_run(strafe);
}else if(event_release(BUTTON_5)) {
combo_stop(strafe);
}
if(is_active(STICK_2_X) || is_active(STICK_2_Y)) {
combo_stop(strafe);
}
}
}
combo RapidFire
{
set_val(BUTTON_5, hold_time ? 100.0 : 0.0);
wait(hold_time);
set_val(BUTTON_5, rest_time ? 0.0 : 100.0);
wait(rest_time);
set_val(BUTTON_5, rest_time ? 0.0 : 100.0);
}
combo recoil_compensation
{
wait(ARecoilDelay);
AntiRecoil(STICK_1_X, ARecoil_H);
AntiRecoil(STICK_1_Y, ARecoil_V);
wait(ARecoilTimed);
AntiRecoil(STICK_1_X, ARecoil_H2);
AntiRecoil(STICK_1_Y, ARecoil_V2);
wait(2000);
}
combo AimAbuse
{
bAutoAimPauseFire = FALSE;
set_val(BUTTON_8, 100);
wait(AutoAimHoldTime - AutoAimFirePrePauseTime);
bAutoAimPauseFire = TRUE;
wait(AutoAimFirePrePauseTime);
set_val(BUTTON_8, 0.0);
wait(AutoAimReleaseTime);
set_val(BUTTON_8, 100);
wait(AutoAimFirePostPauseTime);
}
combo ARA
{
set_val(STICK_1_X, irand(10, 10));
wait(30);
set_val(STICK_1_Y, irand(10, 10));
wait(30);
set_val(STICK_1_X, irand(-10, -10));
wait(30);
set_val(STICK_1_Y, irand(-10, -10));
wait(30);
}
combo ARAF
{
set_val(STICK_1_X, irand(10, 10));
wait(40);
set_val(STICK_1_Y, irand(10, 10));
wait(40);
set_val(STICK_1_X, irand(-10, -10));
wait(40);
set_val(STICK_1_Y, irand(-10, -10));
wait(40);
}
combo TurboMelee
{
set_val(BUTTON_6, 100.0);
wait(40);
set_val(BUTTON_6, 0.0);
wait(40);
set_val(BUTTON_6, 0.0);
}
combo EasySprint
{
set_val(BUTTON_9, 100.0);
wait(40);
set_val(BUTTON_9, 0.0);
wait(40);
set_val(BUTTON_9, 0.0);
reload_delay = 2000;
}
// combo auto_slide {
// set_val(BUTTON_15, 100.00);
//wait(20);
//set_val(BUTTON_15, 0);
//wait(20);
//set_val(BUTTON_15, 100.00);
//wait(20);
//}
combo strafe
{
set_val(STICK_2_X, -100);
wait(STRAFE_SHUFFLE/2);
set_val(STICK_2_X, 100);
wait(STRAFE_SHUFFLE);
set_val(STICK_2_X, 100);
set_val(STICK_2_X, -100);
wait(STRAFE_SHUFFLE);
set_val(STICK_2_X, 100);
wait(STRAFE_SHUFFLE);
set_val(STICK_2_X, 100);
set_val(STICK_2_X, -100);
wait(STRAFE_SHUFFLE/2);
set_val(STICK_2_X, 100);
}
void update_rapidfire() {
printf("<center><font style='color:blue;font-size:14px;',><br>SHOTS PER SECOND: %.04f", sps);
hold_time = 500.0 / sps;
rest_time = hold_time - 1.0;
if(rest_time < 0.0) rest_time = 0.0;
return;
}
void update_anti_recoil(){
printf("<center><font style='color:red;font-size:14px;',><br>VERTICAL RECOIL COMPENSATION: %.04f", ARecoil_V);
printf("<center><font style='color:brown;font-size:14px;',><br>HORIZONTAL RECOIL COMPENSATION: %.04f", ARecoil_H);
printf("<center><font style='color:red;font-size:14px;',><br>VERTICAL RECOIL COMPENSATION 2: %.04f", ARecoil_V2);
printf("<center><font style='color:brown;font-size:14px;',><br>HORIZONTAL RECOIL COMPENSATION 2: %.04f", ARecoil_H2);
return;
}
int irand(int vmin, int vmax) {
return(((int)(rand() * (fix32)(vmax + 1 - vmin))) + vmin);
}
void AntiRecoil(uint8 AxisToApply, float ARecoilToApply)
{
float CurrentX = get_val(STICK_1_X);
float CurrentY = get_val(STICK_1_Y);
float MinARecoilFactor = MinARecoilPercent / 100.0;
float MinARecoilToApply = MinARecoilFactor * ARecoilToApply;
//This sets the ARecoil to be dependent on both X and Y axis movement. With more emphasis on Y
float MovementARecoilToApply = (1.0 - MinARecoilFactor) * ((ARecoilToApply * (100.0 - sqrt(CurrentX*CurrentX + CurrentY*CurrentY))) / (100.0 + abs(CurrentX) + (CurrentY*CurrentY*0.5)));
set_val(AxisToApply,clamp(MinARecoilToApply + MovementARecoilToApply + get_val(AxisToApply),-100.00,100.00 - MinARecoilToApply));
}
-
SweatyPapi - Sergeant Major
- Posts: 91
- Joined: Fri Feb 08, 2019 12:52 am
Re: Need help adjusting script! Thanks in advance!
by Mad » Wed Apr 08, 2020 11:37 am
Added hair triggers (wont do anything if your using xim)
Added the double slide jump, you may need to adjust the timings in the slide combo.
That anti recoil was made for xim what's wrong with it?
Added the double slide jump, you may need to adjust the timings in the slide combo.
That anti recoil was made for xim what's wrong with it?
- Code: Select all
#pragma METAINFO("Crack Aim", 1, 0, "SweatyPapi")
/* *****************************************************************************
<cfgdesc>
[BO4 Special Edtion]
color = #008000
shortdesc = <font color="green">Runtime operations Use Interactive Configurations for changes to settings.
control = info
[RAPID FIRE SETTINGS:]
color = #008000
collapsible = 2
shortdesc = <font color="brown">ENABLE:<font color="green">Rapid Fire?</font>
byteoffset = 0
bitsize = 8
control = radiobox
default = 0
item = Rapidfire OFF
item = Rapidfire ON
[RAPID FIRE OPTIONS:]
group = true
shortdesc = <font color="brown">SHOTS PER SECOND:</font> <font color="green"> Set to desired sps setting 1~25 sps.</font>
byteoffset = 1
bitsize = 32
control = spinboxf
default = 165
minimum = 10
maximum = 250
step = 05
decimals = 1
[ANTI RECOIL SETTINGS:]
color = #008000
collapsible = 2
shortdesc = <font color="brown">ENABLE:<font color="green"> Anti Recoil?
byteoffset = 10
bitsize = 1
bitoffset = 7
control = checkbox
default = 1
item = Anti Recoil ON
[Min Anti Recoil Percent]
group = true
shortdesc = <font color="brown">Minimum Percentage:<font color="green"> Anti Recoil to apply during aim stick movement.
byteoffset = 11
bitsize = 32
control = spinboxf
default = 200
minimum = 0
maximum = 1000
step = 10
decimals = 1
[Stick Noise Remover]
group = true
shortdesc = <font color="brown">STICK NOISE:<font color="green"> Set to the resting dead zone values for your right stick.
byteoffset = 15
bitsize = 32
control = spinboxf
default = 800
minimum = 0
maximum = 10000
step = 50
decimals = 2
[Anti Recoil Delay]
group = true
shortdesc = <font color="brown">Anti Recoil Delay:<font color="green"> (In MS) after fire button is pressed.
byteoffset = 19
bitsize = 16
control = slider
default = 0
minimum = 0
maximum = 1000
step = 5
[Standing Anti Recoil Settings]
group = true
shortdesc = <font color="brown">Anti Recoil:<font color="green"> vertical pull force compensation.
byteoffset = 21
bitsize = 32
control = spinboxf
default = 1800
minimum = -10000
maximum = 10000
step = 10
decimals = 2
[Standing Anti Recoil H Settings]
group = true
shortdesc = <font color="brown">Anti Recoil:<font color="green"> horizontal pull force compensation.
byteoffset = 25
bitsize = 32
control = spinboxf
default = 00000
minimum = -10000
maximum = 10000
step = 10
decimals = 2
[Anti Recoil Timed]
group = true
shortdesc = <font color="brown">Anti Recoil Timed:<font color="green"> (In MS) length of top setting compensation then applying second settings.
byteoffset = 29
bitsize = 16
control = slider
default = 500
minimum = 0
maximum = 2500
step = 5
[Anti Recoil Settings]
group = true
shortdesc = <font color="brown">Anti Recoil:<font color="green"> vertical pull force compensation.
byteoffset = 31
bitsize = 32
control = spinboxf
default = 1800
minimum = -10000
maximum = 10000
step = 10
decimals = 2
[Anti Recoil H Settings]
group = true
shortdesc = <font color="brown">Anti Recoil:<font color="green"> horizontal pull force compensation.
byteoffset = 35
bitsize = 32
control = spinboxf
default = 00000
minimum = -10000
maximum = 10000
step = 10
decimals = 2
[AIM ASSIST SETTINGS:]
color = #008000
collapsible = 2
[AIM ASSIST]
group = true
shortdesc = <font color="green">Works when ads is applied or fired.</font>
byteoffset = 39
bitsize = 1
bitoffset = 7
control = checkbox
default = 1
item = Enable Aim assist
[TURBO MELEE SETTINGS:]
color = #008000
collapsible = 2
[TURBO MELEE MODz]
group = true
shortdesc = <font color="green">Options for Turbo Melee.</font>
byteoffset = 54
bitsize = 8
control = radiobox
default = 2
item = Disable
item = Hold for normal press or double tap for turbo melee.
item = Hold for turbo melee or double tap for normal press.
[AIM ABUSE SETTINGS:]
color = #008000
collapsible = 2
[Aim_Abuse Settings]
group = true
shortdesc = <font color="green">Enable Aim Abuse?</font>
byteoffset = 56
bitsize = 1
bitoffset = 7
control = checkbox
default = 0
item = Aim Abuse
[Auto Aim Hold Time]
group = true
shortdesc = <font color="brown">Auto Aim Hold Time:</font> <font color="green">Configure the time period, in milli-seconds, of which the ADS(Scope) button should be pressed when the aim-assist abuse is activated.</font>
byteoffset = 57
bitsize = 16
control = spinbox
default = 150
minimum = 20
maximum = 5000
step = 50
[Auto Aim Release Time]
group = true
shortdesc = <font color="brown">Auto Aim Release Time:</font> <font color="green">Configure the time period, in milli-seconds, of which the ADS(Scope) button should be released when the aim-assist abuse is activated.</font>
byteoffset = 59
bitsize = 16
control = spinbox
default = 50
minimum = 10
maximum = 5000
step = 5
[Auto Aim Fire Pre Pause Time]
group = true
shortdesc = <font color="brown">Auto Aim Fire Pre Pause Time:</font> <font color="green">Configure the time period, in milli-seconds, to pause rapid fire for given time before ads release.</font>
byteoffset = 61
bitsize = 16
control = spinbox
default = 5
minimum = 0
maximum = 5000
step = 5
[Auto Aim Fire Post Pause Time]
group = true
shortdesc = <font color="brown">Auto Aim Fire Post Pause Time:</font> <font color="green">Configure the time period, in milli-seconds, to pause rapid fire for given time after ads release.</font>
byteoffset = 63
bitsize = 16
control = spinbox
default = 50
minimum = 0
maximum = 5000
step = 5
[AUTO SPRINT SETTINGS:]
color = #008000
collapsible = 2
[Auto Sprint]
group = true
shortdesc = <font color="green">Easy sprint: hold left stick forward too sprint. Adjust reload delay for weapon so you don't sprint cancel reload. Adjust reload cancel the same as delay just incase anytime of reloading and enemy is near engage stick forward fast to get out of reloading.</font>
byteoffset = 67
bitsize = 1
bitoffset = 7
control = checkbox
default = 1
item = Enable Easy Sprint
[Reload Delay]
group = true
shortdesc = <font color="brown">Reload Delay:<font color="green"> (In MS) length that it takes when you first press reload to when magazine clicks in weapon.
byteoffset = 68
bitsize = 16
control = slider
default = 2000
minimum = 0
maximum = 3500
step = 5
[Reload Cancel]
group = true
shortdesc = <font color="brown">Reload Cancel:<font color="green"> (In MS) length of time you sprint cancel reloading in case needing break out to fire on enemy.
byteoffset = 70
bitsize = 16
control = slider
default = 2000
minimum = 0
maximum = 3500
step = 5
[STRAFE SETTINGS:]
color = #008000
collapsible = 2
[Strafe MODz]
group = true
shortdesc = <font color="green">Strafe option.</font>
byteoffset = 115
bitsize = 8
control = radiobox
default = 0
item = Disabled
item = Enabled Strafe (Adjustable)
item = Enabled Strafe(Hip only)(Adjustable)
[Strafe Adjustable Setting]
group = true
shortdesc = <br><b><font color="green">Strafe Adjustable Setting:</font></b>
byteoffset = 116
bitsize = 32
control = spinbox
default = 200
minimum = 0
maximum = 2000
step = 1
</cfgdesc>
***************************************************************************** */
#include <display.gph>
#define wait(a) wait((int)a);
#define float fix32
uint8 rapid_fire;
fix32 sps;
fix32 hold_time, rest_time;
uint8 bUseAntiRecoil;
float ARecoil_H;
float ARecoil_V;
uint16 ARecoilDelay;
float ARecoil_H2;
float ARecoil_V2;
uint16 ARecoilTimed;
float MinARecoilPercent;
float StickNoise;
//Aim Abuse
bool bUseAimAbuse = FALSE;
int AutoAimHoldTime;
int AutoAimReleaseTime;
int AutoAimFirePrePauseTime;
int AutoAimFirePostPauseTime;
bool bAutoAimPauseFire = FALSE;
bool sprint_toggle;
bool AimAssist;
//Turbo Melee
uint8 bUseTurboMelee = 2;
bool turboMelee = TRUE;
bool fast_melee;
uint8 STRAFE_MODz;
uint32 STRAFE_SHUFFLE;
uint16 reload_cancel;
uint16 reload_delay;
init
{
pmem_load();
rapid_fire = pmem_read(0);
pmem_read(1, &sps);
printf("<center><font style='color:blue;font-size:14px;',><br>RAPID FIRE: %u", rapid_fire);
update_rapidfire();
bUseAntiRecoil = (pmem_read(10) >> 7) & 0b1;
printf("<center><font style='color:red;font-size:14px;',><br>ANTI RECOIL: %d", bUseAntiRecoil);
pmem_read(11, &MinARecoilPercent);
pmem_read(15, &StickNoise);
pmem_read(19, &ARecoilDelay);
pmem_read(21, &ARecoil_V);
pmem_read(25, &ARecoil_H);
pmem_read(29, &ARecoilTimed);
pmem_read(31, &ARecoil_V2);
pmem_read(35, &ARecoil_H2);
update_anti_recoil();
AimAssist = (pmem_read(39) >> 7) & 0b1;
bUseTurboMelee = pmem_read(54);
bUseAimAbuse = (pmem_read(56) >> 7) & 0b1;
pmem_read(57, &AutoAimHoldTime);
pmem_read(59, &AutoAimReleaseTime);
pmem_read(61, &AutoAimFirePrePauseTime);
pmem_read(63, &AutoAimFirePostPauseTime);
sprint_toggle = (pmem_read(67) >> 7) & 0b1;
pmem_read(68, &reload_delay);
pmem_read(70, &reload_cancel);
STRAFE_MODz = pmem_read(115);
pmem_read(116, &STRAFE_SHUFFLE);
}
main {
set_val(4, is_active(4) * 100);
set_val(7, is_active(7) * 100);
if(event_active(14)) {
combo_run(slide);
}
// - RAPIDFIRE - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
if(get_actual(BUTTON_5)) {
if (bAutoAimPauseFire == FALSE)
{
set_val(BUTTON_5, 100.0);
if(rapid_fire == 1)
combo_run(RapidFire);
}
}else combo_stop(RapidFire);
if (bUseAntiRecoil)
{
if (abs(get_actual(STICK_1_X)) < StickNoise) set_val(STICK_1_X, 0.0);
if (abs(get_actual(STICK_1_Y)) < StickNoise) set_val(STICK_1_Y, 0.0);
if (abs(get_actual(STICK_2_X)) < StickNoise) set_val(STICK_2_X, 0.0);
if (abs(get_actual(STICK_2_Y)) < StickNoise) set_val(STICK_2_Y, 0.0);
if (event_active(BUTTON_5))
{
combo_run(recoil_compensation);
}
if(event_release(BUTTON_5))
{
combo_stop(recoil_compensation);
}
}
if(AimAssist == 1)
{
if(get_val(BUTTON_8)&& !get_actual(BUTTON_5)) {
combo_run(ARA);
} else
if(get_val(BUTTON_5)) {
combo_run(ARAF);
}
if(is_active(STICK_1_X)){combo_stop(ARA);combo_stop(ARAF);}
if(is_active(STICK_1_Y)){combo_stop(ARA);combo_stop(ARAF);}
}
if(turboMelee == 1)
{
if(bUseTurboMelee == 1)
{
if(fast_melee)
{
if(get_val(BUTTON_6))
{
combo_run(TurboMelee);
}else
{
fast_melee = 0;
}
}else if(event_active(BUTTON_6) && time_release(BUTTON_6) < 140)
{
fast_melee = 1;
}
}
if(bUseTurboMelee == 2)
{
if(get_actual(BUTTON_6))
{
combo_run(TurboMelee);
}else if(event_release(BUTTON_6))
{
combo_stop(TurboMelee);
}
if(event_active(BUTTON_6) && time_release(BUTTON_6) < 140)
{
fast_melee = !fast_melee;
}else if(event_release(BUTTON_6) && time_active(BUTTON_6) <= 140)
{
fast_melee = !fast_melee;
}
if(fast_melee)
{
if(get_actual(BUTTON_6))
{
combo_stop(TurboMelee);
set_val(BUTTON_6, 100.0);
}else if(event_release(BUTTON_6))
{
fast_melee = FALSE;
}
}
}
}
if (bUseAimAbuse)
{
if (get_actual(BUTTON_8) && !get_actual(BUTTON_5))
{
combo_run(AimAbuse);
}
else
{
bAutoAimPauseFire = FALSE;
combo_stop(AimAbuse);
}
}
if(sprint_toggle)
{
// - SPRINT MOD - - - - - - - - - - - - - - - - - - - - - - - - - - -
if(get_val(STICK_2_Y) < -20.0) {
combo_run(EasySprint);
}
if(get_actual(BUTTON_5) || get_actual(BUTTON_8) ||
get_actual(BUTTON_4) || get_actual(BUTTON_7)) {
combo_stop(EasySprint);
}
if(is_release(BUTTON_17) && time_active(BUTTON_17) <= reload_delay) {
combo_stop(EasySprint);
}
if(is_active(STICK_2_Y) && time_active(STICK_2_Y) < reload_cancel)reload_delay = 0;
}
if(STRAFE_MODz == 1) {
if(get_val(BUTTON_5)) {
combo_run(strafe);
}else if(event_release(BUTTON_5)) {
combo_stop(strafe);
}
if(is_active(STICK_2_X) || is_active(STICK_2_Y)) {
combo_stop(strafe);
}
}
if(STRAFE_MODz == 2) {
if((!get_val(BUTTON_8) && get_val(BUTTON_5)) || (event_release(BUTTON_8) && get_val(BUTTON_5))) {
combo_run(strafe);
}else if(event_release(BUTTON_5)) {
combo_stop(strafe);
}
if(is_active(STICK_2_X) || is_active(STICK_2_Y)) {
combo_stop(strafe);
}
}
}
combo slide {
set_val(14, 100);
wait(60);
wait(60);
set_val(14, 100);
wait(60);
set_val(15, 100);
wait(60);
}
combo RapidFire
{
set_val(BUTTON_5, hold_time ? 100.0 : 0.0);
wait(hold_time);
set_val(BUTTON_5, rest_time ? 0.0 : 100.0);
wait(rest_time);
set_val(BUTTON_5, rest_time ? 0.0 : 100.0);
}
combo recoil_compensation
{
wait(ARecoilDelay);
AntiRecoil(STICK_1_X, ARecoil_H);
AntiRecoil(STICK_1_Y, ARecoil_V);
wait(ARecoilTimed);
AntiRecoil(STICK_1_X, ARecoil_H2);
AntiRecoil(STICK_1_Y, ARecoil_V2);
wait(2000);
}
combo AimAbuse
{
bAutoAimPauseFire = FALSE;
set_val(BUTTON_8, 100);
wait(AutoAimHoldTime - AutoAimFirePrePauseTime);
bAutoAimPauseFire = TRUE;
wait(AutoAimFirePrePauseTime);
set_val(BUTTON_8, 0.0);
wait(AutoAimReleaseTime);
set_val(BUTTON_8, 100);
wait(AutoAimFirePostPauseTime);
}
combo ARA
{
set_val(STICK_1_X, irand(10, 10));
wait(30);
set_val(STICK_1_Y, irand(10, 10));
wait(30);
set_val(STICK_1_X, irand(-10, -10));
wait(30);
set_val(STICK_1_Y, irand(-10, -10));
wait(30);
}
combo ARAF
{
set_val(STICK_1_X, irand(10, 10));
wait(40);
set_val(STICK_1_Y, irand(10, 10));
wait(40);
set_val(STICK_1_X, irand(-10, -10));
wait(40);
set_val(STICK_1_Y, irand(-10, -10));
wait(40);
}
combo TurboMelee
{
set_val(BUTTON_6, 100.0);
wait(40);
set_val(BUTTON_6, 0.0);
wait(40);
set_val(BUTTON_6, 0.0);
}
combo EasySprint
{
set_val(BUTTON_9, 100.0);
wait(40);
set_val(BUTTON_9, 0.0);
wait(40);
set_val(BUTTON_9, 0.0);
reload_delay = 2000;
}
// combo auto_slide {
// set_val(BUTTON_15, 100.00);
//wait(20);
//set_val(BUTTON_15, 0);
//wait(20);
//set_val(BUTTON_15, 100.00);
//wait(20);
//}
combo strafe
{
set_val(STICK_2_X, -100);
wait(STRAFE_SHUFFLE/2);
set_val(STICK_2_X, 100);
wait(STRAFE_SHUFFLE);
set_val(STICK_2_X, 100);
set_val(STICK_2_X, -100);
wait(STRAFE_SHUFFLE);
set_val(STICK_2_X, 100);
wait(STRAFE_SHUFFLE);
set_val(STICK_2_X, 100);
set_val(STICK_2_X, -100);
wait(STRAFE_SHUFFLE/2);
set_val(STICK_2_X, 100);
}
void update_rapidfire() {
printf("<center><font style='color:blue;font-size:14px;',><br>SHOTS PER SECOND: %.04f", sps);
hold_time = 500.0 / sps;
rest_time = hold_time - 1.0;
if(rest_time < 0.0) rest_time = 0.0;
return;
}
void update_anti_recoil(){
printf("<center><font style='color:red;font-size:14px;',><br>VERTICAL RECOIL COMPENSATION: %.04f", ARecoil_V);
printf("<center><font style='color:brown;font-size:14px;',><br>HORIZONTAL RECOIL COMPENSATION: %.04f", ARecoil_H);
printf("<center><font style='color:red;font-size:14px;',><br>VERTICAL RECOIL COMPENSATION 2: %.04f", ARecoil_V2);
printf("<center><font style='color:brown;font-size:14px;',><br>HORIZONTAL RECOIL COMPENSATION 2: %.04f", ARecoil_H2);
return;
}
int irand(int vmin, int vmax) {
return(((int)(rand() * (fix32)(vmax + 1 - vmin))) + vmin);
}
void AntiRecoil(uint8 AxisToApply, float ARecoilToApply)
{
float CurrentX = get_val(STICK_1_X);
float CurrentY = get_val(STICK_1_Y);
float MinARecoilFactor = MinARecoilPercent / 100.0;
float MinARecoilToApply = MinARecoilFactor * ARecoilToApply;
//This sets the ARecoil to be dependent on both X and Y axis movement. With more emphasis on Y
float MovementARecoilToApply = (1.0 - MinARecoilFactor) * ((ARecoilToApply * (100.0 - sqrt(CurrentX*CurrentX + CurrentY*CurrentY))) / (100.0 + abs(CurrentX) + (CurrentY*CurrentY*0.5)));
set_val(AxisToApply,clamp(MinARecoilToApply + MovementARecoilToApply + get_val(AxisToApply),-100.00,100.00 - MinARecoilToApply));
}
ConsoleTuner Support Team || ConsoleTuner Discord || InputSense Discord
- Mad
- Major General
- Posts: 4536
- Joined: Wed May 22, 2019 5:39 am
Re: Need help adjusting script! Thanks in advance!
by SweatyPapi » Wed Apr 08, 2020 12:51 pm
what should be the Anti Recoil minimum percentage and stick noise for the Xim? and also for some reason I jump after. maybe the A is too long. its perfect when i have double sprint but i can't do it consistently without jumping in the air after. Wish I had a dedicated prone button like PC
-
SweatyPapi - Sergeant Major
- Posts: 91
- Joined: Fri Feb 08, 2019 12:52 am
Re: Need help adjusting script! Thanks in advance!
by Mad » Wed Apr 08, 2020 12:58 pm
SweatyPapi wrote:what should be the Anti Recoil minimum percentage and stick noise for the Xim? and also for some reason I jump after. maybe the A is too long. its perfect when i have double sprint but i can't do it consistently without jumping in the air after. Wish I had a dedicated prone button like PC
20.0 is fine. Stick noise 0.
If you plug the keyboard into the T2 you can make a dedicated prone button.
ConsoleTuner Support Team || ConsoleTuner Discord || InputSense Discord
- Mad
- Major General
- Posts: 4536
- Joined: Wed May 22, 2019 5:39 am
Re: Need help adjusting script! Thanks in advance!
by GPCNoob » Fri Mar 08, 2024 11:53 am
Mad wrote:SweatyPapi wrote:what should be the Anti Recoil minimum percentage and stick noise for the Xim? and also for some reason I jump after. maybe the A is too long. its perfect when i have double sprint but i can't do it consistently without jumping in the air after. Wish I had a dedicated prone button like PC
20.0 is fine. Stick noise 0.
If you plug the keyboard into the T2 you can make a dedicated prone button.
Please tell me how ?!?!?!? ive been trying to do this for an hour now I cant figure out how to make a dedicated prone and slide button... please ill be forever grateful!!!
-
GPCNoob - Staff Sergeant
- Posts: 14
- Joined: Wed Nov 25, 2020 2:24 am
Re: Need help adjusting script! Thanks in advance!
by Mad » Fri Mar 08, 2024 11:22 pm
GPCNoob wrote:Please tell me how ?!?!?!?
Something like this:
- Code: Select all
#include <keyboard.gph>
init { keymapping_reset(); }
main { if(key_status(KEY_SPACEBAR)) set_val(BUTTON_15, 100); }
https://www.consoletuner.com/wiki/index ... _functions
ConsoleTuner Support Team || ConsoleTuner Discord || InputSense Discord
- Mad
- Major General
- Posts: 4536
- Joined: Wed May 22, 2019 5:39 am
6 posts
• Page 1 of 1
Return to GPC2 Script Programming
Who is online
Users browsing this forum: No registered users and 180 guests