Titan Two Ps4 Pro
5 posts
• Page 1 of 1
Razer Wolverine on PS4
Ok, so sometimes the Wolverine works on the PS4 and im able to play maybe half a game before it cuts out. I’ve even had the Wolverine running without a PS4 controller connected to th T2. But it doesnt seem to stay working on the ps4. Actually most times, when i have the ps4 controller plugged in & the wolverine, the wolverine doesnt respond. Anybody had this issue
-
CLAS275 - Corporal
- Posts: 5
- Joined: Fri Mar 15, 2019 7:32 am
Re: Razer Wolverine on PS4
ConsoleTuner Support Team
-
J2Kbr - General of the Army
- Posts: 20323
- Joined: Tue Mar 18, 2014 1:39 pm
Titan Two Ps4 Pro
Hi guys. When i use the T2 on the xb1 it works just fine. But when i use it on the Ps4 pro with the Razer Wolverine it works maybe 1/10 times but then the Wolverine cuts out midgame. Then i try and use the T2 with the dualshock 4 controler & it doesnt work. Its like the T2 is choosing when it wants to work with the ps4. Can any1 help
-
CLAS275 - Corporal
- Posts: 5
- Joined: Fri Mar 15, 2019 7:32 am
Re: Razer Wolverine on PS4
Is there any help for this?
-
CLAS275 - Corporal
- Posts: 5
- Joined: Fri Mar 15, 2019 7:32 am
Re: Titan Two Ps4 Pro
First, update your Gtuner IV and Titan Two firmware with the new versions released this morning.
After that proceed as the following:
1) Unplug all controllers from the Titan Two;
2) Connect the output to the XB1 console;
3) Connect the PROG port to your computer;
4) Open Gtuner IV and go to top menu Tools -> "Fetch Descriptors ...";
5) Plug the Razer Wolverine to any port at the front of the Titan Two;
6) Wait couple seconds for this window be update with the captured data;
7) Click on the button "Copy Descriptors" and post here.
Thank you.
After that proceed as the following:
1) Unplug all controllers from the Titan Two;
2) Connect the output to the XB1 console;
3) Connect the PROG port to your computer;
4) Open Gtuner IV and go to top menu Tools -> "Fetch Descriptors ...";
5) Plug the Razer Wolverine to any port at the front of the Titan Two;
6) Wait couple seconds for this window be update with the captured data;
7) Click on the button "Copy Descriptors" and post here.
Thank you.
ConsoleTuner Support Team
-
J2Kbr - General of the Army
- Posts: 20323
- Joined: Tue Mar 18, 2014 1:39 pm
5 posts
• Page 1 of 1
Who is online
Users browsing this forum: No registered users and 159 guests