Titan TWo September update
8 posts
• Page 1 of 1
Titan TWo September update
Dear Titan Team
First of all I would like to thank you for your continuies development to the Titan. Unfornitly after your last update I came across the biggest problem, I used to connect my titan two to device plus without any problem but after this update my controller will disconnect after a couple of minutes the controller light par will remain but none of the buttons will fuction at all. Please I just need to get back to update 1.4.3 it was fine for me. can you please help.
First of all I would like to thank you for your continuies development to the Titan. Unfornitly after your last update I came across the biggest problem, I used to connect my titan two to device plus without any problem but after this update my controller will disconnect after a couple of minutes the controller light par will remain but none of the buttons will fuction at all. Please I just need to get back to update 1.4.3 it was fine for me. can you please help.
-
HEMINN - Private
- Posts: 1
- Joined: Sat Sep 28, 2019 10:27 pm
Re: Titan TWo September update
Have you tried the beta? Instructions here: viewtopic.php?f=27&t=13510
ConsoleTuner Support Team || ConsoleTuner Discord || InputSense Discord
- Mad
- Major General
- Posts: 4536
- Joined: Wed May 22, 2019 5:39 am
Re: Titan TWo September update
Please inform which controller you are using on the other device as well as what is the output protocol you have set on this device. Thanks.
ConsoleTuner Support Team
-
J2Kbr - General of the Army
- Posts: 20323
- Joined: Tue Mar 18, 2014 1:39 pm
Re: Titan TWo September update
Mad wrote:Have you tried the beta? Instructions here: viewtopic.php?f=27&t=13510
Huh, looking at the dates, you posted this on September 29, and the beta was released to production on September 11?
I'm having similar problems - PS4 Pro host, Dualshock 4 in primary port for authentication, Xbox One Elite controller used for actual control. This setup started having issues sometime in mid-late summer (and I seriously can't remember if that coincided with a T2 firmware update...), I had been assuming it was hardware or power issues until seeing this.
It definitely got SIGNIFICANTLY worse with the PS4 7.00 update on Tuesday. It seems more likely to happen when the game I'm playing is doing a scene change or has heavy action. (Framerate drop or high CPU load causing a buffer overflow somewhere? Disabling the USB buffer seems like a really bad idea...)
I'll try to dig up the exact configuration tomorrow, I'm booted into Linux at the moment.
Edit: This occurs with PS4 USB as output protocol, hardware configuration described above, and polling rates set to "protocol default". Setting the output rate to 125 Hz seems to improve things (can't be sure, haven't tested enough), setting input rate to anything but "protocol default" causes a complete controller disconnect. (Not just the "controller lights on but no response" - lights go off.)
Unplugging the affected controller and replugging it fixes the problem until the next occurrence. Which has sometimes been almost immediate since the PS4 7.0 update.
--------
viewtopic.php?f=2&t=1935
The TL;DR - Do not private message me unless your question HAS to be private, please ask questions in a public location. I will not answer PMs that contain non-private questions.
viewtopic.php?f=2&t=1935
The TL;DR - Do not private message me unless your question HAS to be private, please ask questions in a public location. I will not answer PMs that contain non-private questions.
-
Entropy512 - First Sergeant
- Posts: 57
- Joined: Mon Mar 26, 2018 9:41 pm
Re: Titan TWo September update
Several beta updates have been released since the OP.
Have you got a script running when this happens?
Have you got a script running when this happens?
ConsoleTuner Support Team || ConsoleTuner Discord || InputSense Discord
- Mad
- Major General
- Posts: 4536
- Joined: Wed May 22, 2019 5:39 am
Re: Titan TWo September update
Hi Entropy512, what game you are noticing this? I've been playing Apex Legeds and BFV on PS4 recently and is working good.
Also, when you notice the issue, this in only on XB1 controller? or the PS4 controller is also affected?
Thanks.
Also, when you notice the issue, this in only on XB1 controller? or the PS4 controller is also affected?
Thanks.
ConsoleTuner Support Team
-
J2Kbr - General of the Army
- Posts: 20323
- Joined: Tue Mar 18, 2014 1:39 pm
Re: Titan TWo September update
Only the XB1 controller - and it may have been the XB1 controller's USB cable going on its way out slowly over a period of 3-4 months. The association with a PS4 update may have been pure coincidence.
OP - try seeing if changing out the USB cable helps.
OP - try seeing if changing out the USB cable helps.
--------
viewtopic.php?f=2&t=1935
The TL;DR - Do not private message me unless your question HAS to be private, please ask questions in a public location. I will not answer PMs that contain non-private questions.
viewtopic.php?f=2&t=1935
The TL;DR - Do not private message me unless your question HAS to be private, please ask questions in a public location. I will not answer PMs that contain non-private questions.
-
Entropy512 - First Sergeant
- Posts: 57
- Joined: Mon Mar 26, 2018 9:41 pm
Re: Titan TWo September update
Entropy512 wrote:OP - try seeing if changing out the USB cable helps.
ConsoleTuner Support Team
-
J2Kbr - General of the Army
- Posts: 20323
- Joined: Tue Mar 18, 2014 1:39 pm
8 posts
• Page 1 of 1
Who is online
Users browsing this forum: No registered users and 175 guests