T2 AU flashing PS4 Please Help

[bwrh]

Hey Guys,

I've been trying my hardest to find a fix for this, and if its a simple one I apologise. I'll give as much info as possible.

I am not using a Bluetooth module and using an official PS4 controller

I have connected and loaded a scripts into 2 of the available 3 memory slots.

When trying to connect the device to the PS4 I get the AU flashing (i know this is an authentication issue)

I have tried the following.

Changed the device settings on the PS4 to read USB only. I have also tried changing the output settings on the T2 to USB Playstation 4.


I have tested all the cables in use and all work with the PS4 controller seperately. I have powered down the PS4 and restarted with the T2 connected and then plugging the PS4 controller into the PS4 (basically I've tried all the connection sequences i can think of)


Am i missing something guys? Please help!

[Skilah]

The output of your T2 should be plugged into your PS4

And you have to plug the PS4 controller with your usb cable into the Input B port of your T2

Also don't forget to configure your playstation controller to use the USB data transfer instead of Bluetooth.
You can find this into your PS4 menu, in devices.

If you don't plug your PS4 controller into the Input B port of your Titan2, you will have AU issues.

[J2Kbr]

The user has this issue already solved, confirmed by email. Thanks.