Titan Two + Bluetooth Module + PC + DS4
5 posts
• Page 1 of 1
Titan Two + Bluetooth Module + PC + DS4
Good Day!
I hope someone in this forum can help me. Like the description says, I have a titan two I am using with a PC with BT module installed and am using a ds4. The titan two sees the controller and its synced properly as the device monitor in Gtuner shows the controller and reacts when I press buttons. So I know it sees it. I have the output protocol set to USB xbox 360. So everything seems like its connected except when I load any game.
Ill plug titan two into output, output light will come one and it will detect controller as both controller and lightbar on Titan turns the same color. Ive tried resetting device, formatting memory card, reloaded firmware, resyncing controller with no luck.
I really hope someone here can help me.
Thank you.
I hope someone in this forum can help me. Like the description says, I have a titan two I am using with a PC with BT module installed and am using a ds4. The titan two sees the controller and its synced properly as the device monitor in Gtuner shows the controller and reacts when I press buttons. So I know it sees it. I have the output protocol set to USB xbox 360. So everything seems like its connected except when I load any game.
Ill plug titan two into output, output light will come one and it will detect controller as both controller and lightbar on Titan turns the same color. Ive tried resetting device, formatting memory card, reloaded firmware, resyncing controller with no luck.
I really hope someone here can help me.
Thank you.
-
eddieboy911 - Staff Sergeant
- Posts: 15
- Joined: Thu May 28, 2020 5:25 pm
Re: Titan Two + Bluetooth Module + PC + DS4
UPDATE:
Im not sure what I did, but it miraculously started working after hours of trial and error and troubleshooting. Im not sure nor can I explain what combination worked. However, I am faced with a new issue. While the controller and the scripts work I believe, on the titan two, I now have 1x (-) displayed flashing on the titan two. Right now I only have 1 game loaded for trouubleshooting.
Im not sure what I did, but it miraculously started working after hours of trial and error and troubleshooting. Im not sure nor can I explain what combination worked. However, I am faced with a new issue. While the controller and the scripts work I believe, on the titan two, I now have 1x (-) displayed flashing on the titan two. Right now I only have 1 game loaded for trouubleshooting.
-
eddieboy911 - Staff Sergeant
- Posts: 15
- Joined: Thu May 28, 2020 5:25 pm
Re: Titan Two + Bluetooth Module + PC + DS4
Nice you got to work. If the problem returns, please update this topic. thanks.
ConsoleTuner Support Team
-
J2Kbr - General of the Army
- Posts: 20323
- Joined: Tue Mar 18, 2014 1:39 pm
Re: Titan Two + Bluetooth Module + PC + DS4
J2Kbr wrote:Nice you got to work. If the problem returns, please update this topic. thanks.
I recreated the issue. I just realized I didn't state that the color for both is red. It seems after I program titan two, I cannot just unplug and replug as this creates the red light error. I need to reboot for it to work properly which is kinda cumbersome if I need to reboot every time I want to use. I can plug into prog port and use it, but if I actually want to play a game, I cannot unless I reboot. Any thoughts??
-
eddieboy911 - Staff Sergeant
- Posts: 15
- Joined: Thu May 28, 2020 5:25 pm
Re: Titan Two + Bluetooth Module + PC + DS4
ConsoleTuner Support Team
-
J2Kbr - General of the Army
- Posts: 20323
- Joined: Tue Mar 18, 2014 1:39 pm
5 posts
• Page 1 of 1
Who is online
Users browsing this forum: No registered users and 178 guests