XIM Apex on PS5 - Output / Input Polling Rate

[Sorothos]

Hey,
I'm using XIM Apex + Titan Two on PS5.

Mouse is at 1000 Hz Polling Rate.
XIM is at 1000 Hz Polling Rate.


How should I configure the Output Polling Rate/ Input Polling Rate to get stable 1000 Hz from mouse to XIM to Titan Two to PS5?


Should I rather choose

Input: Protocol's default
Output: Protocol's default

or

Input: 1000 Hz
Output: 1000 Hz

or

Input: 1000 Hz (for XIM)
Output: Protocol's default (for PS5)
?

[Mad]

Hi,

Set both to 1000hz.

[Sorothos]

Hello, thanks for quick answer, I will do that!

[nameuser]

sorothos im trying to hook up xim to titan two to ps5 using a regular ps4 remote....what goes were i dont know how to hook it up and im using500 hz polling rate

[Maxxgold]

sorothos im trying to hook up xim to titan two to ps5 using a regular ps4 remote....what goes were i dont know how to hook it up and im using500 hz polling rate

Read the first post in this thread, and make sure you are on the beta firmware. You also need a 3rd party PlayStation controller if you don’t want to get interrupted every 7.5 seconds. You set the polling rate in the GTuner software, while your Titan Two is connected.

viewtopic.php?f=27&t=16773


This is how I have mine setup. In the picture I’m using a Xim4, (Apex is upstairs on my Xbox) but it’s the same setup.


viewtopic.php?f=20&t=17129