luffy97 wrote:!Hello
My setup:
- PS4 Pro (Red Dead and fortnite exclusively)
- Microsoft Elite Controller (V2)
- Microsoft Wireless Key (V2)
- 2 different micro SD for using wireless (64go)
- PC windows 10 with updated software Gtuner
- titan two device with original USB cable
- ps4 controller V1 for authentification
1) I followed first time init with ds4 controller but when I disconnect it, A-U message appears on the screen.
With Elite connected in USB : Few minutes or hours later, my elite controller being blocked. Impossible to connect it back. I have to plug unplug T2 to PS4 and then I have my controller connected for few minutes.
When I keep connected ds4, no disconnection.
When using a ps4 you have to have a valid ps4 controller connected all the time. If you remove it you will get a disconnect in the next 10 minutes (can be after 1 minute , ...) and the T2 will display AU.
It is required by the PS4 to have a licensed ps4 controller connected all the time, it is no the T2 that i causing that.
I would use the controller for authentification on Input-B as stated in the manual.
Connect your controller you are playing with on Input-A.
https://www.consoletuner.com/wiki/index ... aystation42) Wireless key doesn't be recognized in input A. At the beginning it was working on input B and ds4 on input A.
Today input A did not work at all the key, not red or green light. I thought that it was an hardware problem maybe... I am not using external power supply. I tried many times to plug unplug elite in USB or DS4 in usb into USB-A, the best I got was a red light., even DS4...
You have to click the Configure button for each SD-card you want to use one the T2 as this will copy the driver required by the xbox wireless adapter to the sd-card.
3) I read that FFB causes lot of trouble in wireless mode. If I connect USB controller, will I able to use it on red dead?
I would try it with rumbles disabled on all ports for now. Just to make sure that FFB is not causing your issues.
If you have everything working fine without it you can activate it again to try it again if it is still stable.
Do I have to send back to the store for repairing? Can you help me please?
Thanks in advance for your support
Update 27/01/2019 : after many tries, my elite controller succeed to connect to input B and dDS4 on input A.
Wireless key impossible to connect
Update 28/01/2019 : Wireless key get connected in progam mode. When I change to "output" led becomes red.In usb mode, I succeed to connect in same time ds4 and elite, but I have lot of disconnection at 5minutes frequency...
I have no Idea what you are trying to say with "program mode" and "when I change to output", but I have no experience with the xbox wireless adapters. Someone else may be able to help you.