COD Black Ops 3 (BO3) version 2.1a

GPC1 script programming for Titan One. Code examples, questions, requests.

Re: COD Black Ops 3 (BO3) version 1.6

Postby UK_Wildcats_Fans » Thu Nov 12, 2015 1:24 am

boat_58 wrote:I just tested it but its yielding the same results as before. You are correct on what i want it to do btw. I see you commented out the sprint part out of the drop shot code. Its still doing the same thing. it just drops to the ground instead of sliding. I am not sure if this will help but to do it regularly, you have to sprint then hold on to the crouch button. If you sprint and push the crouch button, it won't slide it will just crouch. But if you are sprinting and you press and hold the crouch button, it will slide. I just figured that out just now. I am not sure why in private match though it does it perfect but in public matches it doesn't slide.


I commented out other sections of the code too where pressing the fire button would stop the auto sprint combo. I don't know if these sections were needed, but I want to try to take everything that could interfere.

That is a very astute observation that may be part of what is causing the issue. The drop shot combo works by pressing crouch and then repressing it. First is crouch and the second is need to lay down. The first crouch only waits 15 mS before initiating the 2nd crouch. That timing (i.e. short vs long hold of the crouch) may be issue.

If you have time, here are some tests that you can run. Below is the drop shot combo. Try increase the wait(15) time after the first crouch to see if it ever gets the slide working.

Code: Select all
combo DropShot {
//   set_val(SPRINT_EXO,0);
//   wait(15)
   set_val(CROUCH, 100);
   wait(15) // try different values here
   set_val(CROUCH, 100);
   wait(DROP_SHOT_WAIT); 
}


Here is how I make test things to make them faster. I load several versions of the same script into different memory slots and then cycle through the memory slots for testing. Below is an example.

Slot 1 - default script as I provided above
Slot 2 - same script but only change the wait time in the combo from 15 to 50 as described above
Slot 3 - wait time is 100
Slot 4 - wait time is 150
Slot 5 - wait time is 200
Slot 6 - wait time is 250

Let's assume that I find that it works best between 50 to 100 mS. I then delete slot 3 to 5 and go with smaller increments.
Slot 2 - keep the same for reference
Slot 3 - wait time is 60
Slot 4 - wait time is 70
Slot 5 - wait time is 80
Slot 6 - wait time is 90
Slot 7 - wait time is 100

This will help to test quickly without having to go in and out of games.

If you don't get a chance to test, I will try it later tonight.
User avatar
UK_Wildcats_Fans
Brigadier General
Brigadier General
 
Posts: 2171
Joined: Thu Jan 08, 2015 6:53 pm
Location: San Diego, California USA

Re: COD Black Ops 3 (BO3) version 1.7

Postby UK_Wildcats_Fans » Thu Nov 12, 2015 3:18 am

I did some testing but I am getting inconsistent results. The ability to slide varies depending on the weapon. Certain weapons will slide while others will not. It should work in public matches depending on the weapon, class, perks, attachments, etc. Please do some testing and see how this works for you with your various setups.

Code: Select all
/*
GPC Online Library
COD Black Ops 3(BO3) Script
=============================================================================
Device:        Titan One
Author:        Terry (aka UK_Wildcats_Fans)
Game:          Call of Duty Black Ops 3 (BO3)
System:        PlayStation 4 (PS4) or PlayStation 3 (PS3)
Controller:    DualShock 4 (DS4) or DualShock 3 (DS3)
NOTE:   This script should work for Xbox (360 or One) with changes described further below
Game Settings: Tactical Flipped Button Layout
NOTE:   This script should work with other button layouts with changes described further below
Device:        Titan 1 (firmware version 2.27 or newer)
Website:       http:
//www.consoletuner.com
Forum Post:    http://www.consoletuner.com/forum/viewtopic.php?f=6&t=2015
=============================================================================               
COPYRIGHT:
2015 Terry (UK_Wildcats_Fans) from http://www.consoletuner.com. This Script was made and intended for http://www.Consoletuner.com & Titan 0ne ONLY,
UNLESS written premission is given by the creator and/or copywritee. 
All rights reserved. This material may not be reproduced, displayed, modified or distributed without the express prior written permission
of the copyright holder. For permission, contact UK_Wildcats_Fans via the http://www.consoletuner.com/forum website   
=============================================================================
CHANGELOG:
Version 1.0: Initial script from my COD AW v2.5 script used as basis.  Took out items that would not be applicable (i.e. double jump, auto dash, etc.)
Version 1.1: Updated based upon testing during BO3 beta
Version 1.2: Tweaked rapid fire settings
Version 1.3: Added rumble notifier and light bar color changes when activating certain mods
Version 1.4: Clean up and simplify the script.
Version 1.5: Took out section for stopping sprint reload since you can reload while sprinting in BO3
Version 1.6: Added ADS Fire.  If you press the fire button it automatically makes it ADS (aim down sights). LookInversionON is set to FALSE by default
Version 1.7: Added auto hold breath for the snipers out there
=============================================================================
TOGGLES: (You MUST press the ADS or CROUCH button first before)
Press ADS (aim down sights) button in addition with any of the below.  Using ADS button helps to prevent accidental turn ON and OFF when operating killstreaks and/or other times that requires the D PAD
Press LEFT  on the D PAD to activate/deactivate "RAPID FIRE ON/OFF"   
Press RIGHT on the D PAD to activate/deactivate "RAPID FIRE CYCLING"   
Press UP    on the D PAD to activate/deactivate "TBD"       
Press DOWN  on the D PAD to activate/deactivate "DROP SHOT"   

Press CROUCH in addition with any of the below.  Using CROUCH helps to prevent accidental turn ON and OFF when operating killstreaks and/or other times that requires the D PAD
Press LEFT  on the D PAD to activate/deactivate "HOLD BREATH"
Press RIGHT on the D PAD to activate/deactivate "ADS Fire" 
Press UP    on the D PAD to activate/deactivate "QUICK SCOPE"
Press DOWN  on the D PAD to activate/deactivate "ANTI-RECOIL" 
=============================================================================
GAMEPLAY COMMENTS

The timing and functionality with BO3 has not been tested yet.

Rapid Fire:
I am doing something different with rapid fire. Normally, I had been using a rate of fire variable
which was used to make the Hold and Rest Times needed for the rapid fire combo. I am not using direct hold and rest times.
I now have two toggles for rapid fire: (see the TOGGLES section above)
1) toggles rapid fire mod on/off and 2) cycles between different rapid fire values for hold and rest time.
This will help with testing and allow players to have different rapid fire values for different weapons

Quick Melee & Quick Reload:
Treyarch took out sprint reload cancel, so quick melee will not work.  They also modified their code so we cannot do quick reload.

Drop Shot: 
The Drop Shot combo is only started once the shoot button is initially pressed.  It will not run again until it is released and re-pressed again.
If DISABLE_WITH_SCOPE is TRUE, Drop Shot occurs upon button press of SHOOT button without ADS.  If you press ADS button after starting drop,
it will stop the drop shot combo.  You must then release and re-press the SHOOT button to activate drop shot again.  This interferes if you use
the mini gun specialist perk, so you can toggle it on/off while in the game.
           
Auto Sprint & Reloading: 
Reload times vary with weapons and auto sprint can cause problems.  You sometimes have to let off the joystick, hold the RELOAD button or hold ADS to reload fully
If it does not start sprinting right away, you can press the SPRINT button to start it.
You can adjust the reload wait time that best suits your weapons and reloads.

Anti-Recoil:
There is no one right value.  See this thread for more information.  http://www.consoletuner.com/forum/viewtopic.php?f=17&t=1155
If you are USING look inversion you need to change InversionON to TRUE.

Quick Scoping:
There are variables to play around with to meet your specific needs.
I am absolutely terrible at quick scoping, so I don't really use this and haven't tested it that much.
=============================================================================

IN GAME BUTTON LAYOUTS: 
This script was based upon the TACTICAL FLIPPED button configuration.  If you do not play in this configuration, below are changes needed to
play in other button layouts.

USING THIS SCRIPT ON VARIOUS CONSOLES: This script will work with various consoles.
The Titan 1 maps the various controller variables (i.e PS4_R1, PS3_R1, XB1_RB, XB360_RB) to an index number.
See the below link for the data representation table. Therefore, PS4_R1 will work as XB1_RB OR XB360_RB without any changes to the script.
I am not using the menu, view, PS, select, etc. buttons, so they should not be an issue.

Data Representation Index
http://www.consoletuner.com/kbase/data_representation.htm?mw=MjQw&st=MA==&sct=MA==&ms=AAAA

NOTE: The XB360 and XB1 do not have the TACTICAL FLIPPED in game settings; therefore, you have to make changes in the script
to change from TACTICAL FLIPPED to DEFAULT or TACTICAL. See the below.

Option 1: You play in the normal TACTICAL button layout.  Make these changes to the define section per the below
define ADS                     = PS4_L2;          // R1 & L1 can be changed to R2 AND L2
define EXO                     = PS4_L1;          // R1 & L1 can be changed to R2 AND L2
define SHOOT                   = PS4_R2;          // R1 & L1 can be changed to R2 AND L2
define GRENADE                 = PS4_R1;          // R1 & L1 can be changed to R2 AND L2

Option 2: You play in the normal DEFAULT button layout.  Make these changes to the define section per the below
define ADS                     = PS4_L2;          // R1 & L1 can be changed to R2 and L2
define EXO                     = PS4_L1;          // R1 & L1 can be changed to R2 and L2
define SHOOT                   = PS4_R2;          // R1 & L1 can be changed to R2 AND L2
define GRENADE                 = PS4_R1;          // R1 & L1 can be changed to R2 AND L2
define CROUCH                  = PS4_CIRCLE;      // "Default" button layout is PS4_CIRCLE. "Tactical" button layout is PS4_R3
define MELEE                   = PS4_R3;          // "Default" button layout is PS4_R3. "Tactical button layout is PS4_CIRCLE

Option 3: You play in the normal DEFAULT FLIPPED layout.  Make these changes to the define section per the below
define CROUCH                  = PS4_CIRCLE;      // "Default" button layout is PS4_CIRCLE. "Tactical" button layout is PS4_R3
define MELEE                   = PS4_R3;          // "Default" button layout is PS4_R3. "Tactical button layout is PS4_CIRCLE
=============================================================================

LED DEFINITIONS FOR PS4 LIGHT BAR
LED(0,0,0,0); // Off
LED(1,0,0,0); // Blue (default)
LED(0,1,0,0); // Red
LED(0,0,1,0); // Green
LED(0,0,0,1); // Pink
LED(1,0,1,0); // Cyan
LED(0,1,1,0); // Amber (aka yellow)
LED(1,1,1,1); // White

=============================================================================

DEFINES
*/
define ADS                       = PS4_L1;          // R1 & L1 can be changed to R2 and L2
define EXO                       = PS4_L2;          // R1 & L1 can be changed to R2 and L2
define SPRINT_EXO                = PS4_L3;
define LX                        = PS4_LX;
define LY                        = PS4_LY;
define SHOOT                     = PS4_R1;          // R1 & L1 can be changed to R2 AND L2
define GRENADE                   = PS4_R2;          // R1 & L1 can be changed to R2 AND L2
define CROUCH                    = PS4_R3;          // "Default" button layout is PS4_CIRCLE. "Tactical" button layout is PS4_R3.
define RX                        = PS4_RX;
define RY                        = PS4_RY;
define JUMP                      = PS4_CROSS;
define RELOAD                    = PS4_SQUARE;
define MELEE                     = PS4_CIRCLE;      // "Default" button layout is PS4_R3. "Tactical button layout is PS4_CIRCLE.
define SWAP_WEAPONS              = PS4_TRIANGLE;
define UP                        = PS4_UP;
define DOWN                      = PS4_DOWN;
define LEFT                      = PS4_LEFT;
define RIGHT                     = PS4_RIGHT;

define INSTA_FIRE                = 95;   // The % at which it boosts the SHOOT button when pressed - i.e. 95% means when pressed 5%
define INSTA_AIM                 = 95;   // The % at which it boosts the ADS button when pressed - i.e. 95% means when pressed 5%
define INSTA_OTHER               = 95;   // The % at which it boosts the other button when pressed - i.e. 95% means when pressed 5%
define DROPSHOT_QUICKNESS        = 95;   // The % at which it boosts the CROUCH button when pressed - i.e. 95% means when pressed 5%     
define ADS_SPEED                 = 20;   // The % at which it boosts your aiming speed when using ADS         

define DISABLE_WITH_SCOPE        = TRUE; // Will not drop shot if ADS is on
define ANTI_RECOIL               = 20;   // Change this value to compensate to the vertical recoil  ASM1 with rapidfire = 40, BAL no grip = 20; Bal with grp = 0;
define ANTI_RECOIL_LEFT          = 0;    // Change this value to compensate to the left
define ANTI_RECOIL_RIGHT         = 0;    // Change this value to compensate to the right
define ONLY_WITH_SCOPE           = TRUE; // Anti-recoil will only be applied with ADS
define QUICK_SCOPE_WAIT          = 500// Increase this time for a longer ADS time.  Decrease this time for a shorter ADS time
define RELOAD_WAIT               = 2000; // Wait time after stopping auto sprint to allow reloading.  Adjust as necessary
define SHOOT_WAIT                = 300// Wait time after stopping auto sprint to allow shooting
define DROP_SHOT_WAIT            = 1000; // Wait time for drop shot combo (changed from 1200 to 1000)

// VARIABLES =============================================================================

int AkimboSingleON               = FALSE; // Akimbo mode for regular single shot mode
int AkimboRapidON                = FALSE; // Akimbo mode with rapid fire mode
int ThrustJumpON                 = FALSE;
int AutoSprintON                 = TRUE
int AutoDashON                   = FALSE;
int QuickMelee_ON                = FALSE;
int RapidFireON                  = FALSE
int DropShotON                   = TRUE// Always turned on now
int InversionON                  = FALSE// Set this to TRUE if you are using look inversion enabled in the game setting.  Most people are NOT using look inversion
int JitterON                     = FALSE;
int AntiRecoilON                 = FALSE;
int QuickScopeON                 = FALSE;
int QuickReloadON                = FALSE
int RapidFireCounter             = 1;
int anti_recoil;
int anti_recoil_left;
int anti_recoil_right;
int ADS_Fire_On                  = FALSE;
int HoldBreathON                 = FALSE;

// Hold Time is the time in mSeconds that the SHOOT button is pressed. It varies depending on the weapon, game and attachments.
// Release time is the time between shooting.  This will vary depending on the game timing that is coded into the game.

int HoldTime                     = 10// defined in mSeconds for regular Rapid Fire
int RestTime                     = 10// defined in mSeconds for regular Rapid Fire
int HoldTime2                    = 10// defined in mSeconds for Akimbo Rapid Fire
int RestTime2                    = 10// defined in mSeconds for Akimbo Rapid Fire

// MAIN SCRIPT =============================================================================

main {   

    vm_tctrl(-5);  // sets main loop to 5mS vs the default 10mS

    // Makes the button 100% pressed even if barely pressed - aka more sensitive and quicker reaction
    if(get_val(CROUCH)){sensitivity(CROUCH, NOT_USE, 100 + DROPSHOT_QUICKNESS);}   
    if(get_val(ADS)){sensitivity(ADS, 10, 100 + INSTA_AIM);}     
    if(get_val(SHOOT)){sensitivity(SHOOT, 10, 100 + INSTA_FIRE);}
    if(get_val(SPRINT_EXO)){sensitivity(SPRINT_EXO, 10, 100 + INSTA_OTHER);}
    if(get_val(GRENADE)){sensitivity(GRENADE, 10, 100 + INSTA_OTHER);}

    if(event_press(LEFT) && get_val(ADS)) {  // Turn ON and OFF Rapid Fire
        RapidFireON = !RapidFireON;
        if(RapidFireON) {
             combo_run(GreenLED);
             combo_run(RumbleNotifier);
             AkimboSingleON = FALSE// Turn OFF Akimbo modes
             AkimboRapidON = FALSE;   // Turn OFF Akimbo modes
             QuickScopeON = FALSE;    // Turn OFF QuickScope
        }
        if(!RapidFireON) {combo_run(BlueLED);}
    }
   
    // Using this to cycle through rapid fire settings for testing.  It can be used for having multiple rapid fire settings
    // You can set these values to whatever you want and adjust how many different values that you want.
    if(event_press(RIGHT) && get_val(ADS) && RapidFireON) {
       RapidFireCounter = RapidFireCounter + 1;
       combo_run(SingleNotifier);
       if(RapidFireCounter > 5) {RapidFireCounter = 1;} // Change the "5" to how many options that you want
       if(RapidFireCounter == 1){HoldTime = 10; RestTime = 10;} // Preset #1
       if(RapidFireCounter == 2){HoldTime = 15; RestTime = 15;} // Preset #2
       if(RapidFireCounter == 3){HoldTime = 20; RestTime = 20;} // Preset #3
       if(RapidFireCounter == 4){HoldTime = 25; RestTime = 25;} // Preset #4
       if(RapidFireCounter == 5){HoldTime = 30; RestTime = 30;} // Preset #5   
    }
   
    if(event_press(DOWN) && get_val(ADS)) {  // Turns ON and OFF Drop Shot
        DropShotON = !DropShotON;
        if(DropShotON) {
            ADS_Fire_On = FALSE;
            combo_run(AmberLED);
            combo_run(RumbleNotifier);
        }
        if(!DropShotON) {combo_run(BlueLED);}   
      }

    if(event_press(UP) && get_val(CROUCH)) {  // Turns ON and OFF Quick Scope
        QuickScopeON = !QuickScopeON;
        if(QuickScopeON) {
           AkimboSingleON = FALSE;            // Turn OFF Akimbo modes
           AkimboRapidON = FALSE;             // Turn OFF Akimbo modes   
           RapidFireON = FALSE;               // Turn OFF Rapid Fire
           AntiRecoilON = FALSE;              // Turn OFF Anti Recoil
        }
    }

    if(event_press(DOWN) && get_val(CROUCH)) { // Turns ON and OFF Anti-Recoil
        AntiRecoilON = !AntiRecoilON;
        if(AntiRecoilON) {
            combo_run(PinkLED);
            combo_run(RumbleNotifier);
        }
        if(!AntiRecoilON) {combo_run(BlueLED);}   
    }

    if(event_press(RIGHT) && get_val(CROUCH)) { // Turns ON and OFF ADS Fire
        ADS_Fire_On = !ADS_Fire_On;
        if(ADS_Fire_On) {
            DropShotON = FALSE;
            combo_run(WhiteLED);
            combo_run(RumbleNotifier);
        }
        if(!ADS_Fire_On) {combo_run(BlueLED);}   
    }
    if(event_press(LEFT) && get_val(CROUCH)) { // Turns ON and OFF auto hold breath
        HoldBreathON = !HoldBreathON;
        if(HoldBreathON) {
            combo_run(WhiteLED);
            combo_run(RumbleNotifier);
        }
        if(!HoldBreathON) {combo_run(BlueLED);}   
    }


  if(get_val(SHOOT) && ADS_Fire_On && !DropShotON) {set_val(ADS,100);}

  // Drop Shot
  if(event_press(SHOOT) && DropShotON){
        combo_stop(AutoSprint); 
        combo_run(DropShot);
  }
  if(DISABLE_WITH_SCOPE && get_val(ADS)) {combo_stop(DropShot);}

  // Rapid Fire without ADS Fire
  if(get_val(SHOOT) && RapidFireON && !ADS_Fire_On) {combo_run(RapidFire);}
 //   else if(combo_running(RapidFire)) {combo_stop(RapidFire);}

  // Rapid Fire with ADS Fire
  if(get_val(SHOOT) && RapidFireON && ADS_Fire_On) {combo_run(ADSRapidFire);}
//    else if(combo_running(RapidFire)) {combo_stop(RapidFire);}

/* Personal Comment:  I found that I have better game performance without using this.  You can adjust your sensitivity for this.
 
// Faster movement while aiming with ADS
  if(get_val(ADS)){
     sensitivity(RX, NOT_USE, 100 + ADS_SPEED);
     sensitivity(RY, NOT_USE, 100 + ADS_SPEED);
  }                                                       
*/

  // Anti-recoil
  if(!ONLY_WITH_SCOPE || get_val(ADS)) {combo_run(AntiRecoil);}

  // Quick Scope -- CANNOT ADS (aka regular scope) while using Quick Scope -- for regular ADS you must toggle off QuickScopeON  -- see "Toggles" section at the top of this script
  if(QuickScopeON && event_press(ADS) ) {combo_run(QuickScope);}

  // Hold Breath
  if(HoldBreathON && get_val(ADS)) {combo_run(HoldBreath);}

  // AutoSprint -- Try different values (i.e. -90, -95); toggle ON/OFF
  if(get_val(LY) < -99 && AutoSprintON && !combo_running(AllowReloading)) { combo_run(AutoSprint); }
  else if((get_val(LY) > -99 && AutoSprintON)) {combo_stop(AutoSprint); } // Reload will also stop
//  if(event_press(RELOAD)) {combo_stop(AutoSprint); combo_run(AllowReloading);}  // Stop auto sprint to allow reloading (not needed for BO3)
  if(get_val(SHOOT)) {combo_stop(AutoSprint); combo_run(AllowShooting);}    // Stop auto sprint to allow shooting
 
} // End of MAIN

// COMBOS =============================================================================

combo AllowShooting {
    set_val(SPRINT_EXO, 0);
    wait(SHOOT_WAIT); // can adjust to ensure enough time for shooting
}

combo AllowReloading {
    set_val(SPRINT_EXO, 0);
    wait(RELOAD_WAIT); // can adjust to ensure enough time to reload
}

combo RapidFire {
    set_val(SHOOT, 100);
    wait(HoldTime);
    set_val(SHOOT, 0);
    wait(RestTime);
    set_val(SHOOT, 0);
}

combo ADSRapidFire {
    set_val(SHOOT, 100);
    set_val(ADS, 100);
    wait(HoldTime);
    set_val(SHOOT, 0);
    wait(RestTime);
    set_val(SHOOT, 0);
    set_val(ADS, 0);
}

combo DropShot {
   set_val(SPRINT_EXO,0);
   wait(15);
   set_val(CROUCH, 100);
   wait(50);              // 15 is no slide in public but slide in private.  50 is slide in public but no slide in private
   set_val(CROUCH, 100);
   wait(DROP_SHOT_WAIT); 
}

combo QuickScope {
    set_val(ADS, 100);
    wait(QUICK_SCOPE_WAIT)  //Increase this time for a longer ADS time.  Decrease this time for a shorter ADS time.
    set_val(ADS, 0);
    wait(10);
    set_val(SHOOT, 100);
    wait(20);
    set_val(SHOOT, 0);
    wait(60);
    set_val(SHOOT, 0);
}

combo HoldBreath {
    set_val(SPRINT_EXO, 100);
    wait(10);
    set_val(SPRINT_EXO, 100);
}

combo AutoSprint {
    set_val(SPRINT_EXO, 100);
    wait(10);
    set_val(SPRINT_EXO, 100)
}

combo AntiRecoil {                                           
// Look Inversion Enabled
    if(get_val(SHOOT) && AntiRecoilON && InversionON) { // Using AntiRecoilON toggle for testing and when using multiple weapons
      anti_recoil = get_val(RY) - ANTI_RECOIL;            // SUBTRACT anti_recoil when LOOK INVERSION is ENABLED
      if(anti_recoil > 100) anti_recoil = 100;
      set_val(RY, anti_recoil);
      anti_recoil_left = get_val(RX) - ANTI_RECOIL_LEFT;
      if(anti_recoil_left > 100) anti_recoil_left = 100;
      set_val(RX, anti_recoil_left);
      anti_recoil_right = get_val(RX) + ANTI_RECOIL_RIGHT;
      if(anti_recoil_right > 100) anti_recoil_right = 100;
      set_val(RX, anti_recoil_right);
    }
// Normal Look Inversion - look inversion disabled
    if(get_val(SHOOT) && AntiRecoilON && !InversionON) { // Using AntiRecoilON toggle for testing and when using multiple weapons
      anti_recoil = get_val(RY) + ANTI_RECOIL;             // ADD anti_recoil for normal
      if(anti_recoil > 100) anti_recoil = 100;
      set_val(RY, anti_recoil);
      anti_recoil_left = get_val(RX) - ANTI_RECOIL_LEFT;
      if(anti_recoil_left > 100) anti_recoil_left = 100;
      set_val(RX, anti_recoil_left);
      anti_recoil_right = get_val(RX) + ANTI_RECOIL_RIGHT;
      if(anti_recoil_right > 100) anti_recoil_right = 100;
      set_val(RX, anti_recoil_right);
    }
}

combo RumbleNotifier {
    // double rumble
    set_rumble(RUMBLE_A, 100);
    wait(250);
    set_rumble(RUMBLE_A, 0);
    wait(50);
    set_rumble(RUMBLE_A, 100);
    wait(250);
    set_rumble(RUMBLE_A, 0);
    wait(20);
}

combo SingleNotifier {
    // single rumble
    set_rumble(RUMBLE_A, 100);
    wait(200);
    set_rumble(RUMBLE_A, 0);
    wait(20);
}

combo BlueLED {   
    // blue (default)
    set_led(LED_1, 1);
    set_led(LED_2, 0);
    set_led(LED_3, 0);
    set_led(LED_4, 0);
}   

combo GreenLED {
    // green
    set_led(LED_1, 0);
    set_led(LED_2, 0);
    set_led(LED_3, 1);
    set_led(LED_4, 0);
}

combo PinkLED {
    // pink
    set_led(LED_1, 0);
    set_led(LED_2, 0);
    set_led(LED_3, 0);
    set_led(LED_4, 1);
}

combo AmberLED {
    // amber (aka yellow)
    set_led(LED_1, 0);
    set_led(LED_2, 1);
    set_led(LED_3, 1);
    set_led(LED_4, 0);
}

combo WhiteLED {
    // white
    set_led(LED_1, 1);
    set_led(LED_2, 1);
    set_led(LED_3, 1);
    set_led(LED_4, 1);
}
User avatar
UK_Wildcats_Fans
Brigadier General
Brigadier General
 
Posts: 2171
Joined: Thu Jan 08, 2015 6:53 pm
Location: San Diego, California USA

Re: COD Black Ops 3 (BO3) version 1.7

Postby boat_58 » Thu Nov 12, 2015 3:37 am

They did not work. This is what i noticed.

Public Match
-I notice at 250 and up, it would not go prone. It would only do a soft crouch only. The one where it gets on its knees. Since i was running it would get on the knee and get back up quickly. I tested it all the way to 700ms.
-Below 250 it just seem to crouch and then go prone when running. I do not understand why in private matches it doesn't do this and it slides shoots instead.
Private Match
-I notice at 250 and up, it would slide, then get on its knees. The delay is too long that it gets on its knees after its completed the slide.
-Below 250 it performed the slide perfect and get up and start running.

So our range needs to be below 250, but i think its something else thats causing it. Because i don't understand why in private matches, it is able to do the slide, and in public matches, even matches that i am the host, it will not do the slide, instead it will run, then drop to prone.
User avatar
boat_58
First Sergeant
First Sergeant
 
Posts: 64
Joined: Sat Nov 07, 2015 3:33 pm

Re: COD Black Ops 3 (BO3) version 1.7

Postby boat_58 » Thu Nov 12, 2015 3:39 am

UK_Wildcats_Fans wrote:I did some testing but I am getting inconsistent results. The ability to slide varies depending on the weapon. Certain weapons will slide while others will not. It should work in public matches depending on the weapon, class, perks, attachments, etc. Please do some testing and see how this works for you with your various setups.


You got it to slide in public match? what was your setup? I wasn't able to get it to slide in public
User avatar
boat_58
First Sergeant
First Sergeant
 
Posts: 64
Joined: Sat Nov 07, 2015 3:33 pm

Re: COD Black Ops 3 (BO3) version 1.7

Postby UK_Wildcats_Fans » Thu Nov 12, 2015 7:54 am

It seemed to vary depending on the weapon, attachment and perks. I did my initial testing with the kuda but then tried the vmp but it would not work. I believe that it worked with the Sheiva but not gorgon. I did not do enough testing to figure out with combination actually works. That is why I wasn't going to publish it. I will keep testing and see what happens.
User avatar
UK_Wildcats_Fans
Brigadier General
Brigadier General
 
Posts: 2171
Joined: Thu Jan 08, 2015 6:53 pm
Location: San Diego, California USA

Re: COD Black Ops 3 (BO3) version 1.7

Postby olex73 » Thu Nov 12, 2015 10:33 am

Made some test yesterday. Rapid fire don't work. Led don't turn green. I use the default setup button. (Activate is : ads +left pad) still only show the score of the game when I do it. ( but drop shot work perfectly )

I will ask you to do 3 script to download if it s possible??

One for default button
One inversed
One for the other possibility

Or might you explain what code need to be changed ? Your description for use default button explain 6 codes but that still enough ?

Thanks for your help !

Best regards
User avatar
olex73
Sergeant First Class
Sergeant First Class
 
Posts: 24
Joined: Wed Oct 07, 2015 12:07 pm

Re: COD Black Ops 3 (BO3) version 1.7

Postby boat_58 » Thu Nov 12, 2015 1:04 pm

olex73 wrote:Made some test yesterday. Rapid fire don't work. Led don't turn green. I use the default setup button. (Activate is : ads +left pad) still only show the score of the game when I do it. ( but drop shot work perfectly )

I will ask you to do 3 script to download if it s possible??

One for default button
One inversed
One for the other possibility

Or might you explain what code need to be changed ? Your description for use default button explain 6 codes but that still enough ?

Thanks for your help !

Best regards


Here is the script for a DEFAULT. All that was changed was:
Swapped R2/R1 and L2/L1 and R3/CIRCLE

Code: Select all
  /*
    GPC Online Library
    COD Black Ops 3(BO3) Script
    =============================================================================
    Device:        Titan One
    Author:        Terry (aka UK_Wildcats_Fans)
    Game:          Call of Duty Black Ops 3 (BO3)
    System:        PlayStation 4 (PS4) or PlayStation 3 (PS3)
    Controller:    DualShock 4 (DS4) or DualShock 3 (DS3)
    NOTE:   This script should work for Xbox (360 or One) with changes described further below
    Game Settings: Tactical Flipped Button Layout
    NOTE:   This script should work with other button layouts with changes described further below
    Device:        Titan 1 (firmware version 2.27 or newer)
    Website:       http:
//www.consoletuner.com
    Forum Post:    http://www.consoletuner.com/forum/viewtopic.php?f=6&t=2015
    =============================================================================               
    COPYRIGHT:
    2015 Terry (UK_Wildcats_Fans) from http://www.consoletuner.com. This Script was made and intended for http://www.Consoletuner.com & Titan 0ne ONLY,
    UNLESS written premission is given by the creator and/or copywritee.
    All rights reserved. This material may not be reproduced, displayed, modified or distributed without the express prior written permission
    of the copyright holder. For permission, contact UK_Wildcats_Fans via the http://www.consoletuner.com/forum website   
    =============================================================================
    CHANGELOG:
    Version 1.0: Initial script from my COD AW v2.5 script used as basis.  Took out items that would not be applicable (i.e. double jump, auto dash, etc.)
    Version 1.1: Updated based upon testing during BO3 beta
    Version 1.2: Tweaked rapid fire settings
    Version 1.3: Added rumble notifier and light bar color changes when activating certain mods
    Version 1.4: Clean up and simplify the script.
    Version 1.5: Took out section for stopping sprint reload since you can reload while sprinting in BO3
    Version 1.6: Added ADS Fire.  If you press the fire button it automatically makes it ADS (aim down sights). LookInversionON is set to FALSE by default
    Version 1.7: Added auto hold breath for the snipers out there
    =============================================================================
    TOGGLES: (You MUST press the ADS or CROUCH button first before)
    Press ADS (aim down sights) button in addition with any of the below.  Using ADS button helps to prevent accidental turn ON and OFF when operating killstreaks and/or other times that requires the D PAD
    Press LEFT  on the D PAD to activate/deactivate "RAPID FIRE ON/OFF"   
    Press RIGHT on the D PAD to activate/deactivate "RAPID FIRE CYCLING"   
    Press UP    on the D PAD to activate/deactivate "TBD"       
    Press DOWN  on the D PAD to activate/deactivate "DROP SHOT"   

    Press CROUCH in addition with any of the below.  Using CROUCH helps to prevent accidental turn ON and OFF when operating killstreaks and/or other times that requires the D PAD
    Press LEFT  on the D PAD to activate/deactivate "HOLD BREATH"
    Press RIGHT on the D PAD to activate/deactivate "ADS Fire"
    Press UP    on the D PAD to activate/deactivate "QUICK SCOPE"
    Press DOWN  on the D PAD to activate/deactivate "ANTI-RECOIL"
    =============================================================================
    GAMEPLAY COMMENTS

    The timing and functionality with BO3 has not been tested yet.

    Rapid Fire:
    I am doing something different with rapid fire. Normally, I had been using a rate of fire variable
    which was used to make the Hold and Rest Times needed for the rapid fire combo. I am not using direct hold and rest times.
    I now have two toggles for rapid fire: (see the TOGGLES section above)
    1) toggles rapid fire mod on/off and 2) cycles between different rapid fire values for hold and rest time.
    This will help with testing and allow players to have different rapid fire values for different weapons

    Quick Melee & Quick Reload:
    Treyarch took out sprint reload cancel, so quick melee will not work.  They also modified their code so we cannot do quick reload.

    Drop Shot:
    The Drop Shot combo is only started once the shoot button is initially pressed.  It will not run again until it is released and re-pressed again.
    If DISABLE_WITH_SCOPE is TRUE, Drop Shot occurs upon button press of SHOOT button without ADS.  If you press ADS button after starting drop,
    it will stop the drop shot combo.  You must then release and re-press the SHOOT button to activate drop shot again.  This interferes if you use
    the mini gun specialist perk, so you can toggle it on/off while in the game.
               
    Auto Sprint & Reloading:
    Reload times vary with weapons and auto sprint can cause problems.  You sometimes have to let off the joystick, hold the RELOAD button or hold ADS to reload fully
    If it does not start sprinting right away, you can press the SPRINT button to start it.
    You can adjust the reload wait time that best suits your weapons and reloads.

    Anti-Recoil:
    There is no one right value.  See this thread for more information.  http://www.consoletuner.com/forum/viewtopic.php?f=17&t=1155
    If you are USING look inversion you need to change InversionON to TRUE.

    Quick Scoping:
    There are variables to play around with to meet your specific needs.
    I am absolutely terrible at quick scoping, so I don't really use this and haven't tested it that much.
    =============================================================================

    IN GAME BUTTON LAYOUTS:
    This script was based upon the DEFAULT button configuration.

    USING THIS SCRIPT ON VARIOUS CONSOLES: This script will work with various consoles.
    The Titan 1 maps the various controller variables (i.e PS4_R1, PS3_R1, XB1_RB, XB360_RB) to an index number.
    See the below link for the data representation table. Therefore, PS4_R1 will work as XB1_RB OR XB360_RB without any changes to the script.
    I am not using the menu, view, PS, select, etc. buttons, so they should not be an issue.

    Data Representation Index
    http://www.consoletuner.com/kbase/data_representation.htm?mw=MjQw&st=MA==&sct=MA==&ms=AAAA
    =============================================================================

    LED DEFINITIONS FOR PS4 LIGHT BAR
    LED(0,0,0,0); // Off
    LED(1,0,0,0); // Blue (default)
    LED(0,1,0,0); // Red
    LED(0,0,1,0); // Green
    LED(0,0,0,1); // Pink
    LED(1,0,1,0); // Cyan
    LED(0,1,1,0); // Amber (aka yellow)
    LED(1,1,1,1); // White

    =============================================================================

    DEFINES
    */
    define ADS                       = PS4_L2;          // R1 & L1 can be changed to R2 and L2
    define EXO                       = PS4_L1;          // R1 & L1 can be changed to R2 and L2
    define SPRINT_EXO                = PS4_L3;
    define LX                        = PS4_LX;
    define LY                        = PS4_LY;
    define SHOOT                     = PS4_R2;          // R1 & L1 can be changed to R2 AND L2
    define GRENADE                   = PS4_R1;          // R1 & L1 can be changed to R2 AND L2
    define CROUCH                    = PS4_CIRCLE;          // "Default" button layout is PS4_CIRCLE. "Tactical" button layout is PS4_R3.
    define RX                        = PS4_RX;
    define RY                        = PS4_RY;
    define JUMP                      = PS4_CROSS;
    define RELOAD                    = PS4_SQUARE;
    define MELEE                     = PS4_R3;      // "Default" button layout is PS4_R3. "Tactical button layout is PS4_CIRCLE.
    define SWAP_WEAPONS              = PS4_TRIANGLE;
    define UP                        = PS4_UP;
    define DOWN                      = PS4_DOWN;
    define LEFT                      = PS4_LEFT;
    define RIGHT                     = PS4_RIGHT;

    define INSTA_FIRE                = 95;   // The % at which it boosts the SHOOT button when pressed - i.e. 95% means when pressed 5%
    define INSTA_AIM                 = 95;   // The % at which it boosts the ADS button when pressed - i.e. 95% means when pressed 5%
    define INSTA_OTHER               = 95;   // The % at which it boosts the other button when pressed - i.e. 95% means when pressed 5%
    define DROPSHOT_QUICKNESS        = 95;   // The % at which it boosts the CROUCH button when pressed - i.e. 95% means when pressed 5%     
    define ADS_SPEED                 = 20;   // The % at which it boosts your aiming speed when using ADS         

    define DISABLE_WITH_SCOPE        = TRUE; // Will not drop shot if ADS is on
    define ANTI_RECOIL               = 20;   // Change this value to compensate to the vertical recoil  ASM1 with rapidfire = 40, BAL no grip = 20; Bal with grp = 0;
    define ANTI_RECOIL_LEFT          = 0;    // Change this value to compensate to the left
    define ANTI_RECOIL_RIGHT         = 0;    // Change this value to compensate to the right
    define ONLY_WITH_SCOPE           = TRUE; // Anti-recoil will only be applied with ADS
    define QUICK_SCOPE_WAIT          = 500// Increase this time for a longer ADS time.  Decrease this time for a shorter ADS time
    define RELOAD_WAIT               = 2000; // Wait time after stopping auto sprint to allow reloading.  Adjust as necessary
    define SHOOT_WAIT                = 300// Wait time after stopping auto sprint to allow shooting
    define DROP_SHOT_WAIT            = 1000; // Wait time for drop shot combo (changed from 1200 to 1000)

    // VARIABLES =============================================================================

    int AkimboSingleON               = FALSE; // Akimbo mode for regular single shot mode
    int AkimboRapidON                = FALSE; // Akimbo mode with rapid fire mode
    int ThrustJumpON                 = FALSE;
    int AutoSprintON                 = TRUE;
    int AutoDashON                   = FALSE;
    int QuickMelee_ON                = FALSE;
    int RapidFireON                  = FALSE;
    int DropShotON                   = TRUE// Always turned on now
    int InversionON                  = FALSE// Set this to TRUE if you are using look inversion enabled in the game setting.  Most people are NOT using look inversion
    int JitterON                     = FALSE;
    int AntiRecoilON                 = FALSE;
    int QuickScopeON                 = FALSE;
    int QuickReloadON                = FALSE;
    int RapidFireCounter             = 1;
    int anti_recoil;
    int anti_recoil_left;
    int anti_recoil_right;
    int ADS_Fire_On                  = FALSE;
    int HoldBreathON                 = FALSE;

    // Hold Time is the time in mSeconds that the SHOOT button is pressed. It varies depending on the weapon, game and attachments.
    // Release time is the time between shooting.  This will vary depending on the game timing that is coded into the game.

    int HoldTime                     = 10// defined in mSeconds for regular Rapid Fire
    int RestTime                     = 10// defined in mSeconds for regular Rapid Fire
    int HoldTime2                    = 10// defined in mSeconds for Akimbo Rapid Fire
    int RestTime2                    = 10// defined in mSeconds for Akimbo Rapid Fire

    // MAIN SCRIPT =============================================================================

    main {   

        vm_tctrl(-5);  // sets main loop to 5mS vs the default 10mS

        // Makes the button 100% pressed even if barely pressed - aka more sensitive and quicker reaction
        if(get_val(CROUCH)){sensitivity(CROUCH, NOT_USE, 100 + DROPSHOT_QUICKNESS);}   
        if(get_val(ADS)){sensitivity(ADS, 10, 100 + INSTA_AIM);}     
        if(get_val(SHOOT)){sensitivity(SHOOT, 10, 100 + INSTA_FIRE);}
        if(get_val(SPRINT_EXO)){sensitivity(SPRINT_EXO, 10, 100 + INSTA_OTHER);}
        if(get_val(GRENADE)){sensitivity(GRENADE, 10, 100 + INSTA_OTHER);}

        if(event_press(LEFT) && get_val(ADS)) {  // Turn ON and OFF Rapid Fire
            RapidFireON = !RapidFireON;
            if(RapidFireON) {
                 combo_run(GreenLED);
                 combo_run(RumbleNotifier);
                 AkimboSingleON = FALSE// Turn OFF Akimbo modes
                 AkimboRapidON = FALSE;   // Turn OFF Akimbo modes
                 QuickScopeON = FALSE;    // Turn OFF QuickScope
            }
            if(!RapidFireON) {combo_run(BlueLED);}
        }
       
        // Using this to cycle through rapid fire settings for testing.  It can be used for having multiple rapid fire settings
        // You can set these values to whatever you want and adjust how many different values that you want.
        if(event_press(RIGHT) && get_val(ADS) && RapidFireON) {
           RapidFireCounter = RapidFireCounter + 1;
           combo_run(SingleNotifier);
           if(RapidFireCounter > 5) {RapidFireCounter = 1;} // Change the "5" to how many options that you want
           if(RapidFireCounter == 1){HoldTime = 10; RestTime = 10;} // Preset #1
           if(RapidFireCounter == 2){HoldTime = 15; RestTime = 15;} // Preset #2
           if(RapidFireCounter == 3){HoldTime = 20; RestTime = 20;} // Preset #3
           if(RapidFireCounter == 4){HoldTime = 25; RestTime = 25;} // Preset #4
           if(RapidFireCounter == 5){HoldTime = 30; RestTime = 30;} // Preset #5   
        }
       
        if(event_press(DOWN) && get_val(ADS)) {  // Turns ON and OFF Drop Shot
            DropShotON = !DropShotON;
            if(DropShotON) {
                ADS_Fire_On = FALSE;
                combo_run(AmberLED);
                combo_run(RumbleNotifier);
            }
            if(!DropShotON) {combo_run(BlueLED);}   
          }

        if(event_press(UP) && get_val(CROUCH)) {  // Turns ON and OFF Quick Scope
            QuickScopeON = !QuickScopeON;
            if(QuickScopeON) {
               AkimboSingleON = FALSE;            // Turn OFF Akimbo modes
               AkimboRapidON = FALSE;             // Turn OFF Akimbo modes   
               RapidFireON = FALSE;               // Turn OFF Rapid Fire
               AntiRecoilON = FALSE;              // Turn OFF Anti Recoil
            }
        }

        if(event_press(DOWN) && get_val(CROUCH)) { // Turns ON and OFF Anti-Recoil
            AntiRecoilON = !AntiRecoilON;
            if(AntiRecoilON) {
                combo_run(PinkLED);
                combo_run(RumbleNotifier);
            }
            if(!AntiRecoilON) {combo_run(BlueLED);}   
        }

        if(event_press(RIGHT) && get_val(CROUCH)) { // Turns ON and OFF ADS Fire
            ADS_Fire_On = !ADS_Fire_On;
            if(ADS_Fire_On) {
                DropShotON = FALSE;
                combo_run(WhiteLED);
                combo_run(RumbleNotifier);
            }
            if(!ADS_Fire_On) {combo_run(BlueLED);}   
        }
        if(event_press(LEFT) && get_val(CROUCH)) { // Turns ON and OFF auto hold breath
            HoldBreathON = !HoldBreathON;
            if(HoldBreathON) {
                combo_run(WhiteLED);
                combo_run(RumbleNotifier);
            }
            if(!HoldBreathON) {combo_run(BlueLED);}   
        }


      if(get_val(SHOOT) && ADS_Fire_On && !DropShotON) {set_val(ADS,100);}

      // Drop Shot
      if(event_press(SHOOT) && DropShotON){
            combo_stop(AutoSprint);
            combo_run(DropShot);
      }
      if(DISABLE_WITH_SCOPE && get_val(ADS)) {combo_stop(DropShot);}

      // Rapid Fire without ADS Fire
      if(get_val(SHOOT) && RapidFireON && !ADS_Fire_On) {combo_run(RapidFire);}
     //   else if(combo_running(RapidFire)) {combo_stop(RapidFire);}

      // Rapid Fire with ADS Fire
      if(get_val(SHOOT) && RapidFireON && ADS_Fire_On) {combo_run(ADSRapidFire);}
    //    else if(combo_running(RapidFire)) {combo_stop(RapidFire);}

    /* Personal Comment:  I found that I have better game performance without using this.  You can adjust your sensitivity for this.
     
// Faster movement while aiming with ADS
      if(get_val(ADS)){
         sensitivity(RX, NOT_USE, 100 + ADS_SPEED);
         sensitivity(RY, NOT_USE, 100 + ADS_SPEED);
      }                                                       
    */

      // Anti-recoil
      if(!ONLY_WITH_SCOPE || get_val(ADS)) {combo_run(AntiRecoil);}

      // Quick Scope -- CANNOT ADS (aka regular scope) while using Quick Scope -- for regular ADS you must toggle off QuickScopeON  -- see "Toggles" section at the top of this script
      if(QuickScopeON && event_press(ADS) ) {combo_run(QuickScope);}

      // Hold Breath
      if(HoldBreathON && get_val(ADS)) {combo_run(HoldBreath);}

      // AutoSprint -- Try different values (i.e. -90, -95); toggle ON/OFF
      if(get_val(LY) < -99 && AutoSprintON && !combo_running(AllowReloading)) { combo_run(AutoSprint); }
      else if((get_val(LY) > -99 && AutoSprintON)) {combo_stop(AutoSprint); } // Reload will also stop
    //  if(event_press(RELOAD)) {combo_stop(AutoSprint); combo_run(AllowReloading);}  // Stop auto sprint to allow reloading (not needed for BO3)
      if(get_val(SHOOT)) {combo_stop(AutoSprint); combo_run(AllowShooting);}    // Stop auto sprint to allow shooting
     
    } // End of MAIN

    // COMBOS =============================================================================

    combo AllowShooting {
        set_val(SPRINT_EXO, 0);
        wait(SHOOT_WAIT); // can adjust to ensure enough time for shooting
    }

    combo AllowReloading {
        set_val(SPRINT_EXO, 0);
        wait(RELOAD_WAIT); // can adjust to ensure enough time to reload
    }

    combo RapidFire {
        set_val(SHOOT, 100);
        wait(HoldTime);
        set_val(SHOOT, 0);
        wait(RestTime);
        set_val(SHOOT, 0);
    }

    combo ADSRapidFire {
        set_val(SHOOT, 100);
        set_val(ADS, 100);
        wait(HoldTime);
        set_val(SHOOT, 0);
        wait(RestTime);
        set_val(SHOOT, 0);
        set_val(ADS, 0);
    }

    combo DropShot {
       set_val(SPRINT_EXO,0);
       wait(15);
       set_val(CROUCH, 100);
       wait(15);              // 15 is no slide in public but slide in private.  50 is slide in public but no slide in private
       set_val(CROUCH, 100);
       wait(DROP_SHOT_WAIT);
    }

    combo QuickScope {
        set_val(ADS, 100);
        wait(QUICK_SCOPE_WAIT)  //Increase this time for a longer ADS time.  Decrease this time for a shorter ADS time.
        set_val(ADS, 0);
        wait(10);
        set_val(SHOOT, 100);
        wait(20);
        set_val(SHOOT, 0);
        wait(60);
        set_val(SHOOT, 0);
    }

    combo HoldBreath {
        set_val(SPRINT_EXO, 100);
        wait(10);
        set_val(SPRINT_EXO, 100);
    }

    combo AutoSprint {
        set_val(SPRINT_EXO, 100);
        wait(10);
        set_val(SPRINT_EXO, 100)
    }

    combo AntiRecoil {                                           
    // Look Inversion Enabled
        if(get_val(SHOOT) && AntiRecoilON && InversionON) { // Using AntiRecoilON toggle for testing and when using multiple weapons
          anti_recoil = get_val(RY) - ANTI_RECOIL;            // SUBTRACT anti_recoil when LOOK INVERSION is ENABLED
          if(anti_recoil > 100) anti_recoil = 100;
          set_val(RY, anti_recoil);
          anti_recoil_left = get_val(RX) - ANTI_RECOIL_LEFT;
          if(anti_recoil_left > 100) anti_recoil_left = 100;
          set_val(RX, anti_recoil_left);
          anti_recoil_right = get_val(RX) + ANTI_RECOIL_RIGHT;
          if(anti_recoil_right > 100) anti_recoil_right = 100;
          set_val(RX, anti_recoil_right);
        }
    // Normal Look Inversion - look inversion disabled
        if(get_val(SHOOT) && AntiRecoilON && !InversionON) { // Using AntiRecoilON toggle for testing and when using multiple weapons
          anti_recoil = get_val(RY) + ANTI_RECOIL;             // ADD anti_recoil for normal
          if(anti_recoil > 100) anti_recoil = 100;
          set_val(RY, anti_recoil);
          anti_recoil_left = get_val(RX) - ANTI_RECOIL_LEFT;
          if(anti_recoil_left > 100) anti_recoil_left = 100;
          set_val(RX, anti_recoil_left);
          anti_recoil_right = get_val(RX) + ANTI_RECOIL_RIGHT;
          if(anti_recoil_right > 100) anti_recoil_right = 100;
          set_val(RX, anti_recoil_right);
        }
    }

    combo RumbleNotifier {
        // double rumble
        set_rumble(RUMBLE_A, 100);
        wait(250);
        set_rumble(RUMBLE_A, 0);
        wait(50);
        set_rumble(RUMBLE_A, 100);
        wait(250);
        set_rumble(RUMBLE_A, 0);
        wait(20);
    }

    combo SingleNotifier {
        // single rumble
        set_rumble(RUMBLE_A, 100);
        wait(200);
        set_rumble(RUMBLE_A, 0);
        wait(20);
    }

    combo BlueLED {   
        // blue (default)
        set_led(LED_1, 1);
        set_led(LED_2, 0);
        set_led(LED_3, 0);
        set_led(LED_4, 0);
    }   

    combo GreenLED {
        // green
        set_led(LED_1, 0);
        set_led(LED_2, 0);
        set_led(LED_3, 1);
        set_led(LED_4, 0);
    }

    combo PinkLED {
        // pink
        set_led(LED_1, 0);
        set_led(LED_2, 0);
        set_led(LED_3, 0);
        set_led(LED_4, 1);
    }

    combo AmberLED {
        // amber (aka yellow)
        set_led(LED_1, 0);
        set_led(LED_2, 1);
        set_led(LED_3, 1);
        set_led(LED_4, 0);
    }

    combo WhiteLED {
        // white
        set_led(LED_1, 1);
        set_led(LED_2, 1);
        set_led(LED_3, 1);
        set_led(LED_4, 1);
    }
User avatar
boat_58
First Sergeant
First Sergeant
 
Posts: 64
Joined: Sat Nov 07, 2015 3:33 pm

Re: COD Black Ops 3 (BO3) version 1.6

Postby kuni808 » Thu Nov 12, 2015 1:38 pm

UK_Wildcats_Fans wrote:
boat_58 wrote:I just tested it but its yielding the same results as before. You are correct on what i want it to do btw. I see you commented out the sprint part out of the drop shot code. Its still doing the same thing. it just drops to the ground instead of sliding. I am not sure if this will help but to do it regularly, you have to sprint then hold on to the crouch button. If you sprint and push the crouch button, it won't slide it will just crouch. But if you are sprinting and you press and hold the crouch button, it will slide. I just figured that out just now. I am not sure why in private match though it does it perfect but in public matches it doesn't slide.


I commented out other sections of the code too where pressing the fire button would stop the auto sprint combo. I don't know if these sections were needed, but I want to try to take everything that could interfere.

That is a very astute observation that may be part of what is causing the issue. The drop shot combo works by pressing crouch and then repressing it. First is crouch and the second is need to lay down. The first crouch only waits 15 mS before initiating the 2nd crouch. That timing (i.e. short vs long hold of the crouch) may be issue.

If you have time, here are some tests that you can run. Below is the drop shot combo. Try increase the wait(15) time after the first crouch to see if it ever gets the slide working.

Code: Select all
combo DropShot {
//   set_val(SPRINT_EXO,0);
//   wait(15)
   set_val(CROUCH, 100);
   wait(15) // try different values here
   set_val(CROUCH, 100);
   wait(DROP_SHOT_WAIT); 
}


Here is how I make test things to make them faster. I load several versions of the same script into different memory slots and then cycle through the memory slots for testing. Below is an example.

Slot 1 - default script as I provided above
Slot 2 - same script but only change the wait time in the combo from 15 to 50 as described above
Slot 3 - wait time is 100
Slot 4 - wait time is 150
Slot 5 - wait time is 200
Slot 6 - wait time is 250

Let's assume that I find that it works best between 50 to 100 mS. I then delete slot 3 to 5 and go with smaller increments.
Slot 2 - keep the same for reference
Slot 3 - wait time is 60
Slot 4 - wait time is 70
Slot 5 - wait time is 80
Slot 6 - wait time is 90
Slot 7 - wait time is 100

This will help to test quickly without having to go in and out of games.

If you don't get a chance to test, I will try it later tonight.

I believe i might know what the problem is. No1 when sprinting you can only sprint for so long and when that cycle is done and you try to sprint again right away you only sprint for a very short distance until a certian amount of time goes by and then you can sprint longer again. I noticed if your trying to slide but you're on or near the end of your sprint cycle time you just end up crouching. So until that second of time passes to where you can sprint fully again you'll just end up crouching. Correct me if im wrong tho. I don't think there will be a way around this but it don't happen to often in game to really bother me but everyone's different. I will test to confirm 100% if this is the case but im pretty positive.
User avatar
kuni808
Sergeant Major
Sergeant Major
 
Posts: 88
Joined: Sat Sep 05, 2015 3:54 am

Re: COD Black Ops 3 (BO3) version 1.7

Postby Koushik » Thu Nov 12, 2015 2:12 pm

Why does anti recoil doesn't have that much effect.with the vesper it has some recoil. But the anti recoil isn't working
User avatar
Koushik
Sergeant First Class
Sergeant First Class
 
Posts: 17
Joined: Mon Oct 26, 2015 4:25 pm

Re: COD Black Ops 3 (BO3) version 1.7

Postby kuni808 » Thu Nov 12, 2015 2:37 pm

Koushik wrote:Why does anti recoil doesn't have that much effect.with the vesper it has some recoil. But the anti recoil isn't working

You need to look at anti recoil in the script and raise the vertical value/number which is 20 by default. 20 isnt that noticeable so try raising it by 5 until your satisfied.
Code: Select all
define ADS_SPEED                 = 20;   // The % at which it boosts your aiming speed when using ADS         

define DISABLE_WITH_SCOPE        = TRUE; // Will not drop shot if ADS is on
define ANTI_RECOIL               = 20;   // Change this value to compensate to the vertical recoil  ASM1 with rapidfire = 40, BAL no grip = 20; Bal with grp = 0;
define ANTI_RECOIL_LEFT          = 0;    // Change this value to compensate to the left
define ANTI_RECOIL_RIGHT         = 0;    // Change this value to compensate to the right
define ONLY_WITH_SCOPE           = TRUE; // Anti-recoil will only be applied with ADS
define QUICK_SCOPE_WAIT          = 500// Increase this time for a longer ADS time.  Decrease this time for a shorter ADS time
define RELOAD_WAIT               = 2000; // Wait time after stopping auto sprint to allow reloading.  Adjust as necessary
define SHOOT_WAIT                = 300// Wait time after stopping auto sprint to allow shooting
define DROP_SHOT_WAIT            = 1000; // Wait time for drop shot combo (changed from 1200 to 1000)
Remember tho the higher the number the harder it is to adjust your vertical aim while ads. Hope this helps
User avatar
kuni808
Sergeant Major
Sergeant Major
 
Posts: 88
Joined: Sat Sep 05, 2015 3:54 am

PreviousNext

Return to GPC1 Script Programming

Who is online

Users browsing this forum: No registered users and 6 guests