computer not recognizing titan one
16 posts
• Page 1 of 2 • 1, 2
computer not recognizing titan one
my computer is not recognizing my titan one even though its plugged in through the pc prog port on the titan one. the titan one is plugged into the xbox one and the controller and into the pc. i have tried unplugging controller and removing titan one from console how do i get it to recognize it. it recognized it before when everything was plugged in, but now it won't. i have also reset titan one to programming mode to no avail.
-
rgove24 - Corporal
- Posts: 5
- Joined: Sat Nov 22, 2014 5:03 am
Re: computer not recognizing titan one
Hi, Please try reflash the firmware using the recovery procedure:
http://www.consoletuner.com/kbase/firmw ... y_mode.htm
http://www.consoletuner.com/kbase/firmw ... y_mode.htm
ConsoleTuner Support Team
-
J2Kbr - General of the Army
- Posts: 20323
- Joined: Tue Mar 18, 2014 1:39 pm
Re: computer not recognizing titan one
when i try that it says no device detected.
-
rgove24 - Corporal
- Posts: 5
- Joined: Sat Nov 22, 2014 5:03 am
Re: computer not recognizing titan one
It may be the mini-USB cable. Do you have another cable to test? The ones used to charge the Dualshock 3 controllers can be used.
ConsoleTuner Support Team
-
J2Kbr - General of the Army
- Posts: 20323
- Joined: Tue Mar 18, 2014 1:39 pm
Re: computer not recognizing titan one
changed usb cord now it recognizes must have been a bad cord thanks
-
rgove24 - Corporal
- Posts: 5
- Joined: Sat Nov 22, 2014 5:03 am
Re: computer not recognizing titan one
Hello, i have tried using a different cable and still cannot get my computer to recognize my titan one. Any suggestions?
-
Keels10087 - Private First Class
- Posts: 2
- Joined: Wed Jul 19, 2017 6:09 pm
Re: computer not recognizing titan one
I can not seem to get the computer to recognize the titan one anymore it was recognizing it for like 5 mins then it stopped when i updated it and now it will not let me reupdate it or reset it in the back please any help would be greatly appreciated.
-
Robert0626 - Private First Class
- Posts: 2
- Joined: Thu Jul 20, 2017 7:53 pm
Re: computer not recognizing titan one
Does the device powers up after connect it to the PC by the PROG port?
if yes, please try reflash the firmware using the recovery mode, as explained here:
http://www.consoletuner.com/kbase/firmw ... y_mode.htm
It may be necessary double press the reset button to enter in the programing mode (P).
if yes, please try reflash the firmware using the recovery mode, as explained here:
http://www.consoletuner.com/kbase/firmw ... y_mode.htm
It may be necessary double press the reset button to enter in the programing mode (P).
ConsoleTuner Support Team
-
J2Kbr - General of the Army
- Posts: 20323
- Joined: Tue Mar 18, 2014 1:39 pm
Re: computer not recognizing titan one
I tried 2 different cords to connect the titan one to my pc still says device not connected I also tried to reset it and while the p is showing on the titan one I tried to do a firmware update but only got a error code 8 please help me
-
GIVING10 - Private
- Posts: 1
- Joined: Sat Dec 12, 2020 11:46 pm
Re: computer not recognizing titan one
Hi GIVING10. Just replied your PM. Thanks.
ConsoleTuner Support Team
-
J2Kbr - General of the Army
- Posts: 20323
- Joined: Tue Mar 18, 2014 1:39 pm
16 posts
• Page 1 of 2 • 1, 2
Who is online
Users browsing this forum: No registered users and 119 guests