Titan Two: Computer shut down while updating firmware
3 posts
• Page 1 of 1
Titan Two: Computer shut down while updating firmware
Hi there,
I just wanted to update my latest firmware on my Titan Two.
Plugged my Titan Two turned on Gtuner and while I was running my firmware update my computer lost electricity and shut down. And with it appearantly my Titan Two died on me :(
Changed the cable but noting seems to work.
Is there any hope left?
Thanks in advance
Kind regards
I just wanted to update my latest firmware on my Titan Two.
Plugged my Titan Two turned on Gtuner and while I was running my firmware update my computer lost electricity and shut down. And with it appearantly my Titan Two died on me :(
Changed the cable but noting seems to work.
Is there any hope left?
Thanks in advance
Kind regards
-
savagetemptation - Private First Class
- Posts: 2
- Joined: Tue May 14, 2019 3:47 pm
Re: Titan Two: Computer shut down while updating firmware
You should be able to force a firmware update.
remove all cable from the T2. Hold both buttons down and while holding them down connect the T2 prog port to your pc.
After you have connected it let go of both buttons.
Now start GTuner iV (it won't list the T2 but should still be able to run the update) and run Tools -> Check for Updates
remove all cable from the T2. Hold both buttons down and while holding them down connect the T2 prog port to your pc.
After you have connected it let go of both buttons.
Now start GTuner iV (it won't list the T2 but should still be able to run the update) and run Tools -> Check for Updates
-
Scachi - Brigadier General
- Posts: 3044
- Joined: Wed May 11, 2016 6:25 am
- Location: Germany
Re: Titan Two: Computer shut down while updating firmware
Muss dir einen ausgeben!
It worked! Thank you very much
-
savagetemptation - Private First Class
- Posts: 2
- Joined: Tue May 14, 2019 3:47 pm
3 posts
• Page 1 of 1
Who is online
Users browsing this forum: No registered users and 112 guests