Does lots of things including full LED customization and others. Is not done yet, read the comments at the beginning of the script.

To compliment my main script, you can select this script on your key when you are in menus to use the triggers as bumper buttons. I load my main script into "5" (for FM5) and this into "1". When using "0" (no script) the bumper buttons cannot be accessed. My script remaps the XB1 bumpers to the Speed Wheel's triggers.

After two days of learning the script and reading what others have tried and lots of debunking, i've come up with a script that has my U-Shaped MS Speed Wheel work properly. The good: I have nice steering, all the buttons are as per FM4 with the same wheel with some remapping etc and the rumble triggers are sent to the standard A and B rumbles in the wheel. The lights light up on rev limiter, gear shift, offroad rumble and also the right one (accel) when wheelspinning, and both when hard braking. The caveats: You need to use profile 6 in the game, there are no secondary sticks on the wheel for viewing around cars etc. To use bumpers in the game i've created a second script you can switch to while in menus or hold X and press the triggers as a bumper button in the main script, but the up/down buttons no longer work due to remapping. I find it easier to press the Cronus button to switch to my second profile for bumper support in the menus. I might map up and down with holding X soon as a work-around for those who are not right infront of their consoles. There is no clutch, at least not yet... so you need to select no clutch in the assists. I'm sure I can come up with an autoclutch using some combo commands... and I might just do that soon! I've commented on much of what i've done, so you can change as you need. I set rumble amounts based on what I thought FM4 felt like, and what the new rumble triggers in the XB1 console felt like when driving.

This will remap one of the sticks to the X/Y axises of the Sixaxis, useful if you want to use the sticks instead of the sixaxis, or if you are using a controller without support for it. Tested with "Bentley's Hackpack". Controls: While holding Select: Start to enable/disable the remap, L3/R3 to switch which stick is remapped, PS button (plus you must use a Wiimote) to use Wii IR.

This reverse version of my SixAxis remapper script remaps the Sixaxis to one of the sticks. Useful for racing games if you like steering by tilting the controller. To use the script: By default the sixaxis remaps to the left stick. Use Select + L3/R3 to switch which stick to remap to, or press Select + Start to enable/disable the remap.

A remix of my Sixaxis remapper script, this maps either stick's Y axis (up or down) to the accelerator and brake of your favorite racing game controls (aka L2 and R2). Use Select + Start to enable/disable, Select + L3/R3 to switch stick to remap.

This builds off the initial script by LimitZer0. Use with Forza 5 controller layout 6 and an outside steering axis deadzone of 90. While this still does not provide true force feedback (protocols not supported), it does give you: (1) vibration to the wheel that emulates both the XB1 trigger rumble and the overall controller rumble which leaves you with at least a decent feeling of connection to the road; (2) steering input correction; and (3) automatic control of the clutch when upshifting/downshifting so the assist can be turned off. I use it with a Mad Catz Xbox360 Wireless Force Feedback Wheel, and find it suits my needs for now. In addition to LimitZer0, further acknowledgments to 1ronnie and LEX LOST from the ControllerMax forums for some of the rumble and auto-clutch code that was incorporated and modified herein.

Will make R1 and triangle be pressed really fast/

This is my fake fraction script but I made it simple. No extra features. Please enjoy. - Token

A customizable doublejump script. Please enjoy. - Token