All Apple devices with iOS 13+ are supported by the Titan Two device, including the iPhones and iPads. The Titan Two connects to the iOS Device emulating an original DualShock 4 V2 controller.

Relevant information about the PlayStation 4 controller protocol on iOS.

Titan Two support for iOS Device specific features.

1. Bluetooth Module ¹⁾;
2. Micro-SD Card ²⁾;
3. Provided Micro-USB cable or External Power Supply ³⁾.

1. Install and configure the Bluetooth Module and the Micro-SD Card on the Titan Two;
2. Power the Titan Two utilizing the provided Micro-USB cable or the External Power Supply;
3. Configure the Output Protocol of the Titan Two to Bluetooth PlayStation 4.

Pairing Method A:

1. In the iOS Device, go to Settings → Bluetooth and check if Bluetooth is enabled;
2. Press and hold the NEXT button on the Titan Two for 2.5 seconds to enter in pairing mode;
3. In the iOS Device, wait for DUALSHOCK 4 Wireless Controller appear in the Other Devices list and tap on it;
4. The pairing procedure will initiate and after few seconds the Titan Two OUTPUT LED should turn green, indicating the pairing with the iOS Device succeed.

Pairing Method B:

1. In the iOS Device, go to Settings → Bluetooth and check if Bluetooth is enabled;
2. Connect the Titan Two PROG port to the computer using the provided Micro-USB cable;
3. Open Gtuner IV, go to the Device Configuration pane and click the Wireless Bluetooth Pairing button;
4. In the iOS Device, wait for DUALSHOCK 4 Wireless Controller appear in the Other Devices list and tap on it;
5. The pairing procedure will initiate and after few seconds the Titan Two OUTPUT LED should turn green, indicating the pairing with the iOS Device succeed.

1. Power the Titan Two utilizing the provided Micro-USB cable or the External Power Supply;
2. Connect any compatible controller to the Titan Two;
3. Press the PS/Xbox/Guide/Home button on the controller to initiate the wireless connection between the Titan Two and iOS Device.